OMRON C200HG-CPU63-E HOST CONNECTION MANUAL Programmable Terminals Manual

Power supply: AC power supply.
Output method: Transistor output sink type.
Inputs points: 24 points.
Outputs points: 16 points.CV500-MC Special I/O Unit Motion Control Servo Control 4 axis CV500-MC421.Model : C500-LK103-P.
APF/ PCF.Product name: E@@S type CPU Units with 10 I/O Points.
Specifications: Power Supply, 24 VDC; Inputs, 6; Outputs, 4;
Output type: Transistor (sinking) C200HG-CPU63-E Manual C200HG-CPU63-E
Program capacity: 2K steps.
memory Data capacity: 2K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.11A; 24 V，--.
Standards: UC1, N, L, CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality C200HG-CPU63-E Manual.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Model: C200H-IA121.
No. of inputs: 8 pts.
Input voltage: 100 to 120 VAC, +10%/–15%.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts C200HG-CPU63-E Manual.
Internal currentcon-sump-tion: OMRON PID Module C500-PID01(3G2A5-PID01-E)Product name: CJ-series I/O Control Unit.
Specifications: Mount one I/O Control Unit,
on the CPU Rack when connecting one or,
more Expansion Racks.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Connected Unit:
CJ1W-II101 I/O Interface Unit,
Mount to the right of the CPU Unit OMRON Programmable Terminals Manual.
Current consumption: 5V , 0 OMRON Programmable Terminals Manual. 02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable. Model: C500-ETL01 OMRON Programmable Terminals Manual.
C500-ET Special I/O Unit Educational Tool I/O Unit C500-ETL01.Model: C200H-ME832.
Description: EEPROM, 8K words, battery back-up.with clock(CPU21, CPU23 only).CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 100 VAC CV500-FHD01-EUnit type: CS1 Special I/O Units.
Product name: Isolated-type,
Analog Output Unit.
Output points : 4 inputs.
Signal range selection:
Set separately for each input.
Signal range: 0 to 10 V, ±10 V,
0 to 5 V, ±5 V, 0 to 1 V, ±1 V.
Conversion speed (resolution):
40ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 26V, 0.12A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems C200HG-CPU63-E HOST CONNECTION MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems C200HG-CPU63-E Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.