OMRON CP1E-N60DT1-D Manual CP1E-N60DT1-D REFERENCE MANUAL

Unit classification: CJ1 Special I/O Units.
Product name: ProcessInput Units,
(Isolated-type Thermocouple Input Units).
Input points: 2 inputs.
Signal range selection:
Set separately for each input.
Signal range: Thermocouple:
B, E, J, K, L, N, R, S, T, U,
WRe5-26, PLII DC voltage: ±100 mV CP1E-N60DT1-D REFERENCE MANUAL.
Conversion speed (resolution): Conversion,
speed: 10 ms/2 inputs, Resolution: 1/64,000 CP1E-N60DT1-D
Accuracy at ambient temperature of 25°C:
Standard accuracy: ±0.05% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 24V, 0.06A.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e CP1E-N60DT1-D REFERENCE MANUAL. g., 4 to 20 mA or 1 to 5V).
A Unit supports four input channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage).
All inputs are isolated. C500-AS Special I/O Unit ASCII BASIC UNIT C500-ASC01.Model: CPM2C-16ETM. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs CP1E-N60DT1-D REFERENCE MANUAL.
Input type: 24 VDC.
Output type: sinking transistor.Model: C200H-OD214.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.Name: MIL Connectors.
Specifications: Inputs;
16 inputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the locaation and,
content of the error CP1E-N60DT1-D Manual. Model: CPM2C-32EDTM. Units with 32 I/O points
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Connects to the I/O module located on the extreme right CP1E-N60DT1-D Manual. C500-DA Special I/O Unit Analog Output C500-DA501.
Output: 8 pts.
Specification: 0~+5V, 0~+10V, -5~+5V
-10~+10V, 0~+20mA, 4~+20mA.