Ideal for 3-phase Voltage Asymmetry.
Monitoring for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor voltage asymmetry, phase sequence, and phase,
loss for three-phase 3-wire or 4-wire power supplies with just one Unit.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply K3HB-XVD-FLK1AT11 Manual.
One SPDT output relay, 5 A at 250 VAC (resistive load)
K3HB-XVD-FLK1AT11
World-wide power specifications supported by one Unit (switchable).
Relay status can be monitored using LED indicator. Input type: DC voltage input type.
Output type: no output.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V K3HB-XVD-FLK1AT11 Manual.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations K3HB-XVD-FLK1AT11 Manual.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm. Input type: DC voltage input type.
Output type: BCD+ transistor; -; NPN open collector (5 bit output +HH, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with OMRON Digital Temperature Controllers Manual.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V OMRON Digital Temperature Controllers Manual.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend OMRON Digital Temperature Controllers Manual.
External event input can be applied to a variety of measurement and identification situations.
DeviCategory: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Transistor: -; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
TTo support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified K3HB-XVD-FLK1AT11 Communications Manual.
Action determine the color, can switch tthe green / Red 2 kinds of color display K3HB-XVD-FLK1AT11 Manual.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied