OMRON ZX-TDS10T-L Introduction Manual ZX-TDS10T-L Inductive Displacement Manual

Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: point beam.
Beam diameter: diameter of 50 m.
Resolution: 0.8 M.
Cable length: 0.5m. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Panel mount cross roller plunger.
Best-selling Basic Switch Boasting ZX-TDS10T-L Introduction Manual.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy ZX-TDS10T-L
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available ZX-TDS10T-L Introduction Manual. Power supply: 24 VDC.
Output type: NPN.
ZG2 debut!
Achieving stable measurement.
through innovative technology. Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0.6 M.
Cable length: 0.5m. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm ZX-TDS10T-L Introduction Manual.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Classification: High-sensitivity.
Contact gap: H (0.25 mm).
Actuator: Pin plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Actuator: General purpose; Plunger; AC.
Mounting: Base mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series ZX-TDS10T-L Manual.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZX-TDS10T-L Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)