OMRON ZX-TDS10T-VL Manual ZX-TDS10T-VL OPERATION MANUAL

Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Short hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZX-TDS10T-VL OPERATION MANUAL.
A series of standard models for micro loads is available ZX-TDS10T-VL
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 0.9A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1.5 s.
Ion balance: ±10V max ZX-TDS10T-VL OPERATION MANUAL.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max ZX-TDS10T-VL OPERATION MANUAL.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing).
Weight (Packaged): Approx. 0.6 kg (Approx. 1.2 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, L-mounting bracket, Streamer.
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues. Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confiined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome ZX-TDS10T-VL Manual. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted ZX-TDS10T-VL Manual.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.