OMRON ZX-XC8A Introduction Manual

Item: Special PC Software Wave Inspire RX.
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory. For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Optical system: Diffuse reflective.
Beam shape: Spot beam.
Sensing distance: 100±40 mm ZX-XC8A .
Resolution: 16 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZX-XC8A Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Hinge cross roller lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZX-XC8A .
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Slim spring plunger.
Best-selling Basic Switch Boasting ZX-XC8A .
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 1.2A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No iccing or dewing) ZX-XC8A Introduction Manual.
Weight (Packaged): Approx. 1 kg (Approx. 1.8 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designned to go anywhere ZX-XC8A Introduction Manual.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues.