PLC CP1L-EM40DR-D Manual OMRON CP1L-EM40DR-D REFERENCE MANUAL

Type: CJ1 Special I/O Unit.
Connected ID System: V680 Series; 2 Heads.
External power supply: --.
No. of unit numbers used: 2 unit number.
Current consumption: 5V, 0.32A;
24V, 0.26A; External, --.
Communication Unit Dedicated for RFID V680,
Allowing Direct Connection to OMRON PLC CJ/
CS/NJ-series CP1L-EM40DR-D Manual.
Communication unit for connecting RFID V680-series,
which can be used around the world, directly to PLC CP1L-EM40DR-D
Allows batch transfer of data up to 32 kbytes. Model: C200H-PS221.
Supply voltage: 120/240VAC.Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 60 g max CP1L-EM40DR-D Manual. C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD007(3G2A5-AD007).
Input: 4 pts.
Specification: 0~+10V.For 3-slot Backplane.Model: C500-CN431.
Cable length: 40 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.
Model: CPM2A-20CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 12 points.
Outputs points: 8 points.Unit type: CS1 Special I/O Units CP1L-EM40DR-D Manual.
Product name: Analog Input Unit (100 mV).
Input points : 8 inputs.
Signal range: 0 to 100 mV, ±100 mV.
Conversion speed (resolution):
200ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 OMRON CP1L-EM40DR-D REFERENCE MANUAL. 15A; 26V, 0.08A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices OMRON CP1L-EM40DR-D REFERENCE MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling OMRON CP1L-EM40DR-D REFERENCE MANUAL.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacee compared,
with previous systems CP1L-EM40DR-D .
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-EM40DR-D Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.