Programmable Terminals CS1W-SLK21 Manual OMRON CS1W-SLK21 System Manual

Short protection for 10-pin terminal block (package of 10 covers). 8 pts.Control specifications: voltage output / pulse train output.
Axis of control: 1.
Location data: 200.
Connection with servo motor drive,
The location data is transmitted by PC to carry out high precision positioning.
Can set the number of different types of products and location parameters, and can monitor the operation process online CS1W-SLK21 Manual CS1W-SLK21
Equipment operation is flexible and convenient, can achieve start and pause,
Automatic and manual mode switching, counting and zero, cylinder pressure time adjustment, etc..
Screw automatic discharge, feeding, fixed, the machine is automatically completed by one time, without manual assistance CS1W-SLK21 Manual.
High speed production beat, can achieve a single station speed of not less than 1-1.5 seconds / piece.
Positioning accuracy is high, the position error is not more than 0.02 mm.C200H CPU 100/200-240VAC C200H-CPU02-E.Model: CPM2C-16ETC. Units with transistor outputs only.
1 Fujitsu connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.C500-OA I/O Unit Triac Output 16 pts C500-OA222(3G2A5-OA222) CS1W-SLK21 Manual.
AC132V 1A.Model: C500-ETL01.
C500-ET Special I/O Unit Educational Tool I/O Unit C500-ETL01.Model: CPM2C-TS101. 2 inputs for temperature resistance thermometers C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT002-PV1 OMRON CS1W-SLK21 System Manual.
APF/PCF.With two optical connectorsC500-CT/3G2A5-CT Special I/O Unit High-speed Counter Unit 50 kcps 1 pts C500-CT012(3G2A5-CT012) OMRON CS1W-SLK21 System Manual. Model: C200H-B7AI1.
I/O points: 16 points or 15points and 1 error input
Weight: 200g max.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: B, E, J, K, L, N, R, S,
T, U, WRe5-26, PLII, ±100 mV OMRON CS1W-SLK21 System Manual.
Conversion speed: 20 ms/4 inputs,
10 ms/2 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 26V, 0.08A.
Standards: UC1, N, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and sppace compared,
with previous systems CS1W-SLK21 .
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CS1W-SLK21 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.