Programmable Terminals GT1-ID32ML-1 Manual OMRON GT1-ID32ML-1 PROGRAMMING MANUAL

Classification: General-purpose.
Coil ratings: AC 24, 110, 120, 230, 240; DC 6, 12, 24, 48.
Contact form: DPDT.
Slim and Space-saving Power Plug-in Relay.
Reduces wiring work by 60% when combined with the,
P2RF-@-PU Push-In Plus Socket.
(according to actual OMRON measurements).
Lockable test button models available GT1-ID32ML-1 Manual.
Built-in mechanical operation indicator.
Provided with nameplate GT1-ID32ML-1
AC type is equipped with a coil-disconnection self-diagnostic,
function (LED type).
High switching power (1-pole: 10 A). Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 30 A at 180 to 400 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks GT1-ID32ML-1 Manual.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load GT1-ID32ML-1 Manual.
Certified by UL, CSA, and VDE (reinforced insulation). Structure: plastic sealed.
Contact structure: 1C.
Coil rated voltage: DC12V.
Small, high sensitivity 1 pole signal relay.
Small size 12.5 (L) * 7.5 (W) * 10 (H) mm.
Wide range of contact switch area 1mA ~ 1A OMRON GT1-ID32ML-1 PROGRAMMING MANUAL.
High sensitivity coil 150mW.
Plastic sealed type, excellent environmental performance.
Coil contact between the Part68 FCC standard OMRON GT1-ID32ML-1 PROGRAMMING MANUAL. (1500V, 10 * 160 s)Terminal (Wire connection): Push-In Plus Terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: AC, 230V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional OMRON GT1-ID32ML-1 PROGRAMMING MANUAL.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA usinng Au-plated GT1-ID32ML-1 .
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed locatiion) GT1-ID32ML-1 Manual.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging.