Sale SGE-225-0-0600L 05000C-05000C OMRON SGE-225-0-0600L 05000C-05000C

Ratings: 0.1 A at 125 VAC.
Cable: VCTF oil-resistant cable*.
Actuator: Plastic rod.
Cable length : 5m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection SGE-225-0-0600L 05000C-05000C.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material SGE-225-0-0600L 05000C-05000C
Cable lengths of 3 and 5 m available on standard models SGE-225-0-0600L 05000C-05000C.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Time specification: Inverse type.
Current setting range: 8 to 26 A SGE-225-0-0600L 05000C-05000C.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three .
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Mounted Connector: MR Plugs.
No. of poles: 20.
Dimension A: 79.
Dimension B: 57.
Mounted Connector model: MR-20RMD2 *3.
Cable Connector model: MR-20F*3.
New Slim Connector-Terminal Block,
Conversion Units.
Mounting area reduced by 35% (in comparison with,
40-pole XW2B Units) to contribute to doownsizing,
control panels and automaticc equipment OMRON SGE-225-0-0600L 05000C-05000C.
Fallout prevention for terminal screws.
Round or forked crimp terminals can be used.
Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status,
during DIN Track attachmmennt and removal OMRON SGE-225-0-0600L 05000C-05000C.
Terminal cover can be locked open.
Screw terminals are arranged by color in groups,
of five to simplify counting terminal numbers.
SGE-225-0-0600L 05000C-05000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-225-0-0600L 05000C-05000C&select=5