WS02-CFDC1-E OMRON WS02-CFDC1-E

Power ratings: 180 W.
Input voltage: 100 to 240 VAC(allowable range: 85 to 264 VAC or 80 to 370 VDC*1).
Output voltage: 24 V.
Output current: 7.5 A.
Alarm output *2: Sourcing.
UL Class 2 Output standards: --.
Model number(screwless terminal block).
60/90/120/180/240/480-W Models.
New Models with Indication OMRON WS02-CFDC1-E.
Monitor and Simple Functions for.
Easy System Commissioning.
New 90-W models with indication monitor that WS02-CFDC1-E
conform to UL Class 2 Output standards.
New models with screwless terminal blocks and,
indication monitor.
Status displayed on 3-digit, 7-segment display.
Safety standards: UL 508/60950-1,
CSA C22 OMRON WS02-CFDC1-E. 2 No. 107.1/60950-1,
EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) .
Input conditions: DC input is also possible from 80 to 370 VDC.
(Not compliant with EC Directives and other safety standards.) Type: 1A contact type.
Shape: square.
Terminal shape: solder terminal.
Action: instantaneous.
Display mode: LED display.
Operation Department color: red.
Large capacity compact type push button switch OMRON WS02-CFDC1-E.
Can also be used as a power switch with a large capacity cut .
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load. I/O Interface UnitNumber of I/O points: 128 inputs and 128 outputs.Control voltage: 100/110/120 VAC.
Reset: Automatic.
Model: Instantaneous type (See note 1.).
Solid-state Relay Provides Three Operating.
Functions in a Compact Package.
Prevents burnouts in 3-phase induction motors due to overcurrent,
open-phase, or reverse-phase.
LEDs indicate operation of the selected operating function.
Wide setting ranges: current: 1 to 160 A; operating time: 1 to 40 s.
Protects the motor from reversing without starting it.
before using the K2CM. Type: high temperature.
Measuring temperature range: 0 ~ +1000.
The target size: 35mm diameter (from 1000mm).
No need to contact the workpiece, you can measure the temperature.
Achieve no damage, health and efficient temperature management.
A small spot diameter 3mm and 8mm diameter two types.
Reproduction of positive and negative 0.5 degrees Celsius, response speed of 0.4 seconds,
(95%) with high precision and high speed measurement.
In addiition to the origginal middle temperature (0 ~ +500 C),
Also added in low temperature (- 50 DEG C ~ +500),
High temperature (0 ~ +1000 degrees C) models WS02-CFDC1-E.
New measurement distance up to 500mm, 1000mm long distance type.
Use another programmer, can chhannge the temperature monitoring, radiation rate,
Moving average function and output range WS02-CFDC1-E.
(picture for the installation of programmer in the ES1 body)
WS02-CFDC1-E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=WS02-CFDC1-E&select=5