C200H-OC222 OMRON C200H-OC222

Actuator: Adjustable rod lever 25 to 140 mm.
Item: Weather-proof; Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON C200H-OC222.
Standard-feature gold-clad crossbar contacts provide high reliability C200H-OC222
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models OMRON C200H-OC222. Contact type: Microload (125 VAC, 0 . 1 A; 30 VDC 0.1 A).
Operation: Momentary operation (Self-resetting).
Output: DPDT.
Lighting: LED, 12 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton,
in @. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body OMRON C200H-OC222.
Combines miniature design with distinct but soft sense of operation .
Easy panel mounting from the front and simple lamp replacement.
without tools. Determine the vibration of equipment and machinery.
With the aid of vibration level can be easily recognized, set the ON/OFF output.
Confirm vibration waveform by AC monitor output.
Sensor part of the use of IP67 protection structure, can also be used in harsh environments.
Can switch acceleration, speed (linear output type).
Using 5 processing modes to determine the abnormal state of high accuracy (manual setting).
Ontology: part of the controller.
Category: linear output. Size: M8(Stainless steel)(See note 2.); Single; Unshielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Long.
Output configuration: PNP.
Operation mode NO.
A new generation in global applications. A screw specification (JIS): 1/4 R.
For the protection of pipe diameter: diameter of 3.2mm.
Size: B, 5; C, 15; D, 12.
Plain diameter: C,, 17; B, 14 .
A variety of high precision temperature sensor series C200H-OC222.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a theermmostat C200H-OC222.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
C200H-OC222 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=C200H-OC222&select=5