OMRON CPM2C-10CDT1C-D

Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting method (See note 1.): M8 Connector (3-pin).
Body length: Long.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications. Output: DPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2 OMRON .
Item: Momentary operation (Self-resetting) CPM2C-10CDT1C-D
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads OMRON .
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1 . Protective tubing length: M6 screw.
Lead wire length: 4m.
Element type: K (CA).
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers OMRON .
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal . Ultra high performance sensors support the core quality of large scale ultra precision measurement.
Measurement center distance of 20 ~ 1500 mm of various models.
Maximum resolution of 0.25 mu m.
Maximum response speed of 110 Mu s.
Support parallel output.
Best size / stability.
Sensor size.
Pay attention to the performance of the best sensor head size and 3 point type fixed structure to ensure superior sensing stability.
Excellent mobile resolution.
Perspective resolution enhancement.
By improving the sensitivity and resolution of the optical lens,
Optimization of optical system,
Thereby greatly reducing the motion resolution error (due to the location of the workpiece surface caused by the error). Size: 96 x 96mm.
Control output 1: voltage output (SSR driver).
Control output 2: relay output.
Auxiliary output: 4 points (auxiliary output 2, 1 common, auxiliary output 3, 4 public general).
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 2 point (three phase heater).
Communication: RS-485.
Event input: 2 points.
Remote SP input: -.
Transfer output: -.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point traansfer output and remote SSP input, suitable for a wide range of applications OMRON CPM2C-10CDT1C-D.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperratture controller is connected to each other by using the component communication OMRON CPM2C-10CDT1C-D.
A new type of proportional control allows you to control the valve.
CPM2C-10CDT1C-D Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=CPM2C-10CDT1C-D&select=5