MITSUBISHI HA-LF45K1M4 HA-LF45K1M4

Max input / output points: 14 points.
Power supply voltage: DC24V.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 19.
Weight (kg):0.3.
Size (WxHxD) mm:60x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time MITSUBISHI HA-LF45K1M4.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control HA-LF45K1M4
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device MITSUBISHI HA-LF45K1M4.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain .
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI HA-LF45K1M4.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication . MITSUBISHI inverter FR-A740 series.
Voltage level: 3 phase 400V.
Frequency converter capacity: 90KW.
Frequency converter is the application of frequency conversion technology and micro electronics technology, by changing the motor operating power frequency mode to control the AC motor power control equipment.
The converter is composed of rectifier (AC), filter, inverter (DC), braking unit, driving unit, micro processing unit of the detection unit.
Inverter by the internal IGBT to adjust the output power supply voltage and frequency,
According to the actual needs of the motor to provide the required power supply voltage, and then achieve the purpose of energy saving, speed control, in addition to the,
Inverter has a lot of protection functions, such as over current, over voltage, overload protection and so on. DB A20 AnyWire master station.
Transmission distance: the longest 3km.
Data input and output: up to 1024 points.
Connect up to 128 units.
Enter 512 points, 512 points out of the output.
Support environmental protection, high speed, long distance transmission and special distribution system to support the special flat cable, universal VCTF cable, universal single wire cable and other cable.
Using original transmission mode, there is almost no branch limit,
Supports the automatic track and ring transmission,
Can also create suitable for small and medium sized factory wiring system.
Support remote I//O, analog quanttity, temperature and humidity terminal, anti false operation terminal and other equipment HA-LF45K1M4.
Up to 128 units from the station module
Can connect up to 128 units from the station module, for up to 1024 points (input 512 points / outputt 5512 points) of the I/O control HA-LF45K1M4.
In addition, the parameters can be set through the switch, easy to set the transmission distance of 50m/200m/1km/3km.
HA-LF45K1M4 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HA-LF45K1M4&select=5