A0J2HCPUP21 MITSUBISHI A0J2HCPUP21

Number of channels: 4 channels.
Sensing method and temperature range: PT100.
A1S64TC series component is a kind of temperature controller combined with ANS series CPU.
Components with temperature measurement input and built-in PID algorithm control output, can be used in a variety of temperature control occasions MITSUBISHI A0J2HCPUP21.
Each component controls up to 4 loops at most.
Thermocouple input or PT100 3 wire temperature sensor input A0J2HCPUP21
Control output switching signal for the output of the transistor.
BW is a signal with broken line detection function. Function: 4CH voltage input / current input.
Adapter for connecting the left extension function of the CPU module MITSUBISHI A0J2HCPUP21.
CPU module can be connected to the left side up to 6 units . Motor series: low inertia, medium power.
Rated output power: 15.0kw.
Rated speed: 1000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI A0J2HCPUP21. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting .
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. Using A6SIM-X64Y64 simulation I/O module in the system before the connection can be carried out to control the process of debugging.
The simulation unit consists of 16 blocks of 4 switches and 4 LED LEDs. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch pooint,
Must be ree calibrated to the touch screen system A0J2HCPUP21.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A0J2HCPUP21.
A0J2HCPUP21 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A0J2HCPUP21&select=5