GT15-A370C12B-S1A MITSUBISHI GT15-A370C12B-S1A

Motor series: low inertia, low power.
Rated output power: 0.75kw.
Rated speed: 3000r/min.
Whether with brake: No.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: low inertia is particularly suitable for high speed motor (6000 or 12000 RPM / min) of general industrial machinery MITSUBISHI GT15-A370C12B-S1A.
Application example 1: drive belt drive, robot.
Application example 2: assembly machine, sewing machine, X-Y working table GT15-A370C12B-S1A
Application example 3: food manufacturing machinery, semiconductor manufacturing equipment, knitting machine and embroidery machine.
High resolution encoder 131072p/rev (17 bit) MITSUBISHI GT15-A370C12B-S1A.
The encoder with high resolution ensures excellent performance and stability at low speed .
All motor dimensions are the same as before and all are compatible with the wiring. Input type: DC input, negative public end.
Input points: 16 points.
Enter the response time: 1.5ms the following.
Rated input voltage / current: DC24V/7mA.
External connection: 2~4 line type MITSUBISHI GT15-A370C12B-S1A.
Waterproof connector type.
Strong waterproof type of IP67 protection grade.
No need to stop the system can be replaced module .
Without the use of tools can be a simple connection, save time.
Terminal resistor built-in.
Can be installed along the 6 direction.
Hardware simulation method is to use a number of hardware equipment to simulate the generation of the signal,
The signals are connected to the input end of the PLC system in a hard wired way, and the timeliness is strong.
Software simulation method is in the MITSUBISHI PLC in the preparation of a set of simulation program,
The simulation provides the field signal, which is simple and easy to operate, but it is not easy to guarantee the timeliness.
Simulation of the process of debugging, debugging method can be used to segment, and the monitoring function of programmer. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 2.0kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor.
Power specification: three phase AC200V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically.
32 segment response level can be set .
Advanced vibbration suppression control GT15-A370C12B-S1A.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops.
TThee automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine GT15-A370C12B-S1A.
GT15-A370C12B-S1A Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=GT15-A370C12B-S1A&select=5