MITSUBISHI MR-J2S-15KA

Servo motor series: super low inertia, medium power.
Rated output: 2.0kw.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Shaft end specification: Standard (straight axis).
Features: ultra low inertia is very suitable for high frequency operation.
IP level: IP65.
Application example:
1, ultra high frequency transmission system MITSUBISHI .
Abundant motor product line can optimize the performance of the machine MR-J2S-15KA
Has a rich motor product line including a rotary servo motor, linear servo motor and direct drive motor. Cable length: 0.6m.
For the connection between QCPU and GOT.
For connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25 MITSUBISHI . The length of the line: 2M.
IP level: IP65.
Cable lead out direction: motor shaft different side .
Bending life: standard.
The cable is not shielded.
Encoder with cable (motor side); for HF-KP/HF-MP series (motor shaft with side extraction). 10BASE5.
When communicating in the PLC network of MITSUBISHI,
There is no sense of difference and discontinuity in the network,
Can carry on the remote monitoring, modification, debugging and other work of data communication and program,
Without taking into account the level and type of network MITSUBISHI .
MELSECNET/H and CC-Link use the way of loop communication,
Periodically automatically send and receive messages,
Does not require specialized data communication procedures,
Simple parameters can be set.
MELSECNET/H and CC-Link are used to transmit and receive the broadcast mode,
This can be done on the network data sharing.
For the use of Ethernet, MELSECNET/H, CC-Link network,
Can set the network parameters and various functions, simple and convenient in the Developer GX software screen. Power: 55kw.
Voltage: 400V.
The power factor of the input power factor is up to 0.99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode.
Equipped with standard power retrogradation function. SRAM PC card.
Applicable models: A95_GOT (-M3) /A956WGOT. "Power: 110kw.
Voltage: 200V.
Sine wave filter.
The voltage and current of the motor ccan be adjusted to a sine wwave MITSUBISHI MR-J2S-15KA.
The sine wave filter is installed to the output terminal of the inverter.
Applicable to FR-A820-03800 (75K) above and FR-A840-02160 (75K) and above frequency converter.
Sine wave filter is equivalent to the operationnall characteristics of the sine wave power driver, can provide the following benefits MITSUBISHI MR-J2S-15KA.
Low noise.
No surge current.
Reduce motor loss (standard motor).
MR-J2S-15KA Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J2S-15KA&select=5