MR-J2S-37KA4 MITSUBISHI MR-J2S-37KA4

Cable flat cable;
Connector with 20 pin installed at both ends of the fuse.
Length 1.5M. Connecting cable for handheld GOT and PLC.
Cable length: 1.5 meters.
Application: RS-422 connection (FX series). I/O slots: 2 slots.
Can you install the power module.
Outline dimension: 155*130.
There are two types of extended floor,
A power module can be inserted, and the other one is not MITSUBISHI MR-J2S-37KA4.
The choice of any type of substrate depends on the total DC5V current consumption and the power supply on the CPU main substrate MR-J2S-37KA4
If the total demand is less than the power output, no additional power supply,
Then you can choose a more economical expansion board MITSUBISHI MR-J2S-37KA4.
Both ends of the main base plate of the CPU have an expansion interface, and can be used for extending the cable connection . Motor series: low inertia, medium power.
Rated output power: 11.0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI MR-J2S-37KA4. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 15.0kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor.
Power specification: three phase AC400V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically.
32 segment response level can be set .
Advanceed vibration suppression control MR-J2S-37KA4.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops.
TThee automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine MR-J2S-37KA4.
MR-J2S-37KA4 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-J2S-37KA4&select=5