MR-PWS1CBL5M-A2-H MITSUBISHI MR-PWS1CBL5M-A2-H

SRAM+E2PROM memory card.
RAM capacity: 128KB.
E2PROM capacity: 128KB. Output points: 16 points.
Output voltage and current: DC12~24V; 0.1A/ point; 1.6A/ common.
OFF leakage current: 0.1mA;
Response time: 1ms; 1 point 16 public end; leaky type.
18 point spring clip connection terminal.
With heat protection MITSUBISHI MR-PWS1CBL5M-A2-H.
With short circuit protection.
With the surge absorber.
Continue to go beyond, to climb the peak of Q series MR-PWS1CBL5M-A2-H
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password MITSUBISHI MR-PWS1CBL5M-A2-H.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users .
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location.
Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI MR-PWS1CBL5M-A2-H.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields .
Can also be used in combination with the CPU module to achieve appropriate control.
Easy connection programming tool via ethernet.
Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),
No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.
Therefore, this connection method and the use of USB, can easily communicate with the CPU,
Even the operators are not familiar with the network settings can easily establish a connection.MELSECNET/10.
Inter-PC fiber loop. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.75kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: single phase AC200V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication.
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and moonitoring and other opperations MR-PWS1CBL5M-A2-H.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient.

Thhe servo amplifier can be used for speed control operation MR-PWS1CBL5M-A2-H.
When the two stations are occupied, the speed can be set directly by the remote register.
MR-PWS1CBL5M-A2-H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MR-PWS1CBL5M-A2-H&select=5