OMRON 3G3FV-A4110-E 3G3FV-A4110-E

Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Crossroller plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON 3G3FV-A4110-E. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material 3G3FV-A4110-E
Cable lengths of 3 and 5 m available on standard models OMRON 3G3FV-A4110-E.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)NO. OF I/O SLOTS: 11 SLOTSNumber of outputs: 8 pts.
Max OMRON 3G3FV-A4110-E. switch-ing capacity: 2 A at 24 V DC.
External connector: Terminal block.
Weight: 200 g max . Model : C500-PS222-E.
Expansion I/O Backplane Power Supply
100 to 120 VAC or 200 to 240 VAC (selectable).
Output ratings: 7 A, 5 VDC.Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Automatic.
Output: SPST-NO + SPST-NC.
Operating voltage: 200 VAC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Type: Standard.
Sealing: Flux-tight.
Poles: 6 poles.
Contact configuration: 4PST-NO, DPST-NC.
Rated voltage: 12, 18, 21, 24, 48, 110 VDC.
Compact, Slim Relays Conforming to,
EN Standards.
Relays with forcibly guided contacts,
(EN50205 Classs A, certified byy VDE) 3G3FV-A4110-E.
Supports the CE marking of machinery (Machinery Directive).
Helps avoid hazardous machine status when used as part of,
an interlocking circuit.
Four-pole and six-pole Relays are available.
The Relay’s terminal arrangemmennt simplifies PWB pattern design 3G3FV-A4110-E.
Reinforced insulation between inputs and outputs.
Reinforced insulation between some poles of different polarity.
3G3FV-A4110-E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=3G3FV-A4110-E&select=5