E2G-M12KS02-WP-C2 OMRON E2G-M12KS02-WP-C2

Number of beams: 28.
Protective height: 590mm.
New Standard of Safety Light.
Curtain,Offering Both Robustness.
and Reliability.
Robust and compact.
New muting function to increase both productivity and safety.
All models designed for global use. PNP/NPN selection by.
DIP switch.
Conforming to major international standards including OMRON E2G-M12KS02-WP-C2.
Chinese standard GB 4584. Mounting type: W-bracket(see note) E2G-M12KS02-WP-C2
Contact form: 3PST-NO/SPST-NC.
Screw terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads OMRON E2G-M12KS02-WP-C2.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage .
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and between the coil and contacts.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Ratings: Standard load; 5 A at 125 VAC OMRON E2G-M12KS02-WP-C2.
Cable: VCTF oil-resistant cable *1.
Actuator: Roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also .
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Contact type: Microload (125 VAC, 0.1 A; 30 VDC 0.1 A).
Operation: Momentary operation (SSelf-resetting) .
Outtput: SPDT E2G-M12KS02-WP-C2.
Lighting: LED, 5 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton,
in @. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
CCombines miniature design with distinct but soft sense of operation E2G-M12KS02-WP-C2.
Easy panel mounting from the front and simple lamp replacement.
without tools.
E2G-M12KS02-WP-C2 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2G-M12KS02-WP-C2&select=5