OMRON E2G-M18KS05-WS-B2 E2G-M18KS05-WS-B2

Model: CPM2C-16ETC. Units with transistor outputs only.
1 Fujitsu connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Output: DPDT.
Lighting: LED.
Operating voltage: 5 VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2 OMRON E2G-M18KS05-WS-B2.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia E2G-M18KS05-WS-B2 Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1 OMRON E2G-M18KS05-WS-B2. Item: Advanced models; Analog output models.
Functions: Analog output models .
Model: PNP output.
Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimizes light,
reception at the press of a button.
APC circuits to suppress LED aging degradation used with,
4-element LEDs.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel OMRON E2G-M18KS05-WS-B2.
2-channel models also offer AND/OR control output.
The E3X-MDA0 with two channels supports an EtherCAT Sensor .
Communications Unit or CompoNet Sensor Communications Unit. Size: 48 x 24mm.
Control output 1: relay output.
Control output 2:--.
Auxiliary output: 2 points.
Power supply voltage: AC100 ~ 240V.
Terminal type: screw terminal table type (with terminal cover).
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: 1 points.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance.
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc..
Although the small size, but also through the character of the high 10.5mm white PV display to achieve high recognition.
The terminal stage is adopted to disassemble and assemble the structure, which improves the maintenance perfformance .
The connecction method can be selected from a screw terminal and a PUSH-IN fastening terminal E2G-M18KS05-WS-B2.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication.
The use of electric communication converrsiion Village (sold separately) connected to the computer after,
No power connection can be set E2G-M18KS05-WS-B2.
It can be easily set by CS-Thermo (sold separately).
E2G-M18KS05-WS-B2 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E2G-M18KS05-WS-B2&select=5