OMRON E6C2-CWZ6C-10 1000P/R 5M E6C2-CWZ6C-10 1000P/R 5M

Control power supply voltage: 100/110 VAC.
Input: DC, Input voltage range, 10 to 300 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL) OMRON E6C2-CWZ6C-10 1000P/R 5M.
Detect three-phase AC current for under and/or overcur,
rent using current converter E6C2-CWZ6C-10 1000P/R 5M
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection OMRON E6C2-CWZ6C-10 1000P/R 5M.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F) .
LED operation indicator.
UL/CSA approval (SDV-F@). Name: Set.
Easy-to-use, Simple Magnetic.
Proximity Sensor.
Permanent magnetic used to operate the reed switch.
Ideal for detecting opening and closing of doors. Type: Standard.
Setting distance: 31 to 187 mm (variable) OMRON E6C2-CWZ6C-10 1000P/R 5M.
Sensing area: 10 X 9.2 mm to 50 X 46 mm (variable).
Degree of protection: IP65 .
Simple to use.
Detection abilities close to human vision.
One-touch automatic setting for stable detection.
2.2-inch monitor integrated in compact housing.
Sensor Heads with field of view up to 150 mm. Item: FZ4 Series Controllers; Standard Controllers.
Descriptions: Controllers integrated with LCD.
High-Grade Proc'' Items: --.
No.of cameras: 4.
Output: NPN.
Remarks: With touch pen.
Speed and accuracy determine the basic,
performance of sensing.Usability efficiently,
puts that performance to work.OMRON’s FZ,
Series of Vision Sensors represent an evolu,
tionary journey that takes these three aspects,
from the past and into the future to allow you,
to increase quality. Size: 48 * 48mm, terminal type.
Type: control output 1 point type (power AC/DC24V).
Shell color: black.
Control output: linear voltage output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater break, SSR fault detection function: -.
Event input points: -.
Transfer output: output (using control output).
Communication: -.
New program type.
A new type of liquid crystal with high performance cost ratio is adopted in the 256 paragraph,
Visual angle, contrast can be improved.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
High resolution 5 bit display / can display 0.01 degrees C (to achieve a small size of 48 x 48mm).
High speed sampling period 60ms.
Full of all models (capable of thermocouple /Pt/ analog input switching),
1 machines to support a variety of sensors.
Add PV/SV state display function, tto see the state of the thermmostat
(automatic / manual, RUN/RESET, alarm),
Interactive display PV/SV E6C2-CWZ6C-10 1000P/R 5M.
By supporting software (Ver.4.3 CX-Thermo),
In simple arithmetic functions (AND/OR logic and delay).
Setting the program settings that can performm fflexible contact output E6C2-CWZ6C-10 1000P/R 5M.
The control output ON/OFF times counting function can predict the fault of the internal relay of the temperature controller.
E6C2-CWZ6C-10 1000P/R 5M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=E6C2-CWZ6C-10 1000P/R 5M&select=5