3G3MX2-A2022-ZV1 OMRON 3G3MX2-A2022-ZV1 Outline dimension (deep):1705mm Multi function small frequency converter

Applicable converter capacity: maximum 15KW, minimum 0.4KW.
Connected to the converter input / output cable,
Reduce the noise from the power supply line to the frequency converter or from the converter to the power line. Function name: three phase 400V.
Power: 0.4KW.
Maximum output voltage: three phase 380 ~ 480VAC (corresponding input voltage) OMRON 3G3MX2-A2022-ZV1.
Rated voltage, frequency: three-phase power supply 380 ~ 50/60Hz, 480V 3G3MX2-A2022-ZV1
Cooling way: natural wind cooling.
Weight: 1.1kg.
Simple but not simple, casual and not casual.
Homogenization of today, the quality of the subtle show.
Standard configuration has RS485 interface, Modbus bus communication function.
3Hz provides more than 150% torque output.
2-15kHz carrier frequency, can achieve mute driver OMRON 3G3MX2-A2022-ZV1.
Equipped with simple energy saving function.
Compact size and uniform, and can be installed close to the side by side.
Signal output function for controlling external brake action.
Software setting operation mode, no need to connect the control line can be used for speed control. Inverter input power: 3 phase / single phase AC200V.
Weight: 3.9KG.
Standard applicable line diameter: 14 square mm or more OMRON 3G3MX2-A2022-ZV1.
Used to suppress harmonic currents generated by a transducer.
The effect of harmonic current suppression is better than that of AC reactor,
And it can be used with AC reactor. Power supply: 3 phase 3 line rated voltage 500V AC.
Rated current: 50A OMRON Multi function small frequency converter.
Weight: 3.7KG.
Used to reduce the noise generated by the inverter.
Try to be close to the transducer for connection OMRON Multi function small frequency converter. Function name: 3 phase 200V.
Power: 0.1KW.
Rated output voltage: 3 phase, 200 ~ 240V (the output voltage can not exceed the input voltage).
Built in brake unit (brake resistance needs to be matched).
Weight: 1.0KG.
Dimension (w * h) 128mm *:68.
Outline dimension (deep):109mm.
Mechanical automation concept OMRON Multi function small frequency converter.
Positioning function.
The use of options.
(EtherCAT, CompoNet and DeviceNet) to realize the field bus communication.
Driver programming function.
Current vector control.
High starting torque: 0.5Hz up to 200%.
Safety features, in compliance with ISO13849-1:2008 EN (Cat.3/PLd) and IEC60204-1 stop level 0 standard.
Frequency output up to 580H. Specification: three phase 200V.
Power: 0.4KW.
Maximum output voltage: three phase AC200 ~ 240V (input voltage correspondence).
Rated voltage: three phase 240V ~ 50/60Hz AC200.
Weight: about 3kg.
In the inverter is equipped with the servo can play the same static torque with PG vector control function,
DeviceNet communication makes the application field more extensive.
The high functioonal specifications are concentrated in the compact 3G3MX2-A2022-ZV1.
Equipped with PG vector control.
Subsequent models of 3G3RV.
CV/VT selection function.
Rich online automatic adjustment function (self learning function).
CX-Drive software. OMRON 3G3MX2-A2022-ZV1.
DeviceNet correspondence correspondence.
Multi function input and output function.
Colorful function.
Brake transistor built-in.
Protection function.