CA3-USBCB-01 Data transmission USB cable (2 m) Proface CA3-USBCB-01 

COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Touch screen anti ultraviolet protective film (1 pieces).The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display Proface CA3-USBCB-01. Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointAdapter for converting an audio output portion of a AUX adapter into a Jack Pin socket CA3-USBCB-01LT seal on the control panel.One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel Proface CA3-USBCB-01. 3 / setsWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Direct interface Matsushita Electric PLC FP series CPU port.12.1 inches, replace the backlight (1 / set)7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeThe installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace Proface CA3-USBCB-01. 15 inches, replaced by a host of backlight (1).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface Data transmission USB cable (2 m). Portable GP2000H series models accessories, RS-422 single head cable (10 m).7.5 inches, GP installed to the hard panel to provide dust and moisture proof function Proface Data transmission USB cable (2 m). Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Used to display analog RGB (2 channels) on the GP3000Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters Proface Data transmission USB cable (2 m). For connecting the GP3000H cable connector and the external output port, the output of thee following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA3-USBCB-01. 128MB, for the implementation of the picture save, log and data backup and other data management operations, such as commpression flash memory card Proface CA3-USBCB-01. The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1