PFXZCBCBMD1 Proface MITSUBISHI 2-Port PLC adapter II (5 m) PFXZCBCBMD1

Standard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. LT4000M (module type analog), NPN output, DC24V (host).Used to output the image signal from the host computer to GPThe MITSUBISHI A series PLC is connected to GP, length: 5 m.Connector for connecting DC power cord. (linear, 5 / set)For the man-machine interface hanging in the neck lanyard Proface PFXZCBCBMD1. For connecting GP operation data with RS-422 and power /DIO terminals PFXZCBCBMD1GP3000H replacement label (5 sheets / set)Suitable for LT4000M/GP4000M series modules, 5.7 inch. Converting SIO to RS-422 terminal blockUsed to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. For 5.7 inch models, connect the connector to the DIO interface Proface PFXZCBCBMD1. For connecting external I/O devices. (5 / set)12.1 inches, replaced by a host of backlight (1).Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceUsed to prevent disconnection of the connection (1 interface, 5 / set).GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface PFXZCBCBMD1. 15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) Proface MITSUBISHI 2-Port PLC adapter II (5 m). Note: joints A and B are different, the joints C and D different.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface MITSUBISHI 2-Port PLC adapter II (5 m).
Length of 5 meters. Touch panel operation for RGB input modules (Master - from: Mini-B)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.12 way 2 digital signals into analog signals and output resultsOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT Proface MITSUBISHI 2-Port PLC adapter II (5 m) PFXZCBCBMD1. Used in a variety of host and man-machine interface for RS-232C connection12.1 inches /10.4 inches (STN), the GP installed to the hard panel to pprovide dust and moisture proof function Proface PFXZCBCBMD1. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L type