Home
>> Products
>> OMRON
>> Temperature controller
>> Modularization
>> EJ1G Series Temperature Controller to PLC OMRON EJ1G Series
EJ1G Series Temperature Controller to PLC OMRON EJ1G Series
EJ1G Series Introduce |
EJ1G Series Model |
EJ1G Series Catalog/Manual/Instructions/Software download
EJ1G Series Catalog/Manual/Instructions/Software download
Brand:
OMRON
Name: Modular Temperature Controller for Gradient Temperature Control
Model: EJ1G Series
Gradient Temperature Control to Achieve.
Consistent Layer Temperature.
Perform gradient temperature control ranging from 2 to 32,
channels.
Perform 2-channel gradient temperature control for up to 16,
groups, or 32-channel gradient temperature control for up to 2,
groups.
Set gradient temperature control or 2-PID control for each,
group.
Reduce design work for ladder programming with programless,
connections to Programmable Controllers. (The same feature,
as Standard-control EJ1 Models.).
Connect directly to the G3ZA Multi-channel Power Controller,
using optimum cycle control for high-accuracy control with,
minimal noise.
...More relevant models >>>>
Name: Modular Temperature Controller for Gradient Temperature Control
Model: EJ1G Series
Gradient Temperature Control to Achieve.
Consistent Layer Temperature.
Perform gradient temperature control ranging from 2 to 32,
channels.
Perform 2-channel gradient temperature control for up to 16,
groups, or 32-channel gradient temperature control for up to 2,
groups.
Set gradient temperature control or 2-PID control for each,
group.
Reduce design work for ladder programming with programless,
connections to Programmable Controllers. (The same feature,
as Standard-control EJ1 Models.).
Connect directly to the G3ZA Multi-channel Power Controller,
using optimum cycle control for high-accuracy control with,
minimal noise.
Case color: Black.
Control output: Relay output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 2.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: --.
Transfer output *2: --.
Communi cations: RS-485.
Previous model: Thermocouple input, --;
Resistance thermometer input, -- OMRON EJ1G Series.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance EJ1G Series Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks OMRON EJ1G Series.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colors OMRON EJ1G Series.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs. The main body: terminal type, temperature input type.
Category: control output 2 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output 1: current output.
Control output 2: voltage output (SSR driver) OMRON Modular Temperature Controller for Gradient Temperature Control.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points OMRON Modular Temperature Controller for Gradient Temperature Control.
A power supply for the detection of /ES1B fault, SSR fault and heater over current for heater use.
Event entry point: 2.
Transfer output: output (using control output).
Communication: -.
48mm general thermostat has been upgraded & function / performance upgrade OMRON Modular Temperature Controller for Gradient Temperature Control.
Indicates that the accuracy is increased and the preventive maintenance function is increasedd,
Further performance improvement EJ1G Series.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivve display PV/SV OMRON EJ1G Series.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
Control output: Relay output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 2.
Detection of heater burnout, SSR failure, and heater overcurrent: --.
No. of event inputs: --.
Transfer output *2: --.
Communi cations: RS-485.
Previous model: Thermocouple input, --;
Resistance thermometer input, -- OMRON EJ1G Series.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance EJ1G Series Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks OMRON EJ1G Series.
A PV/SV-status display function can be set to automatically alternate,
between displaying the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colors OMRON EJ1G Series.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs. The main body: terminal type, temperature input type.
Category: control output 2 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output 1: current output.
Control output 2: voltage output (SSR driver) OMRON Modular Temperature Controller for Gradient Temperature Control.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points OMRON Modular Temperature Controller for Gradient Temperature Control.
A power supply for the detection of /ES1B fault, SSR fault and heater over current for heater use.
Event entry point: 2.
Transfer output: output (using control output).
Communication: -.
48mm general thermostat has been upgraded & function / performance upgrade OMRON Modular Temperature Controller for Gradient Temperature Control.
Indicates that the accuracy is increased and the preventive maintenance function is increasedd,
Further performance improvement EJ1G Series.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivve display PV/SV OMRON EJ1G Series.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
...More relevant models >>>>
Last one: OMRON DeviceNet Communications Unit E5ZN-DRT
next one: OMRON Modular Temperature Controller for Gradient Temperature Control EJ1G-TC2A-QNH
Related download
Related model