Home
>> Products
>> MITSUBISHI
>> L series PLC
>> FA products
>> FA-TB8XY3 AnyWireASLINK master module MITSUBISHI FA-TB8XY3
FA-TB8XY3 AnyWireASLINK master module MITSUBISHI FA-TB8XY3
Brand:
MITSUBISHI
Name: Conversion module
Model: FA-TB8XY3
Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module.
...More relevant models >>>>
Name: Conversion module
Model: FA-TB8XY3
Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module.
RS-232, RS-422/485.
Transmission speed: 230.4kbps.
MC protocol.
Communication protocol support function.
Can only be used on the ch1 side.
Device for immediate communication
Communication protocol support function through Works2 GX,
Can easily set the required agreement with the other equipment communication MITSUBISHI FA-TB8XY3.
In addition, only the communication protocol library is required to select the equipment to be carried out,
Immediate connection FA-TB8XY3
The creation and editing of communication protocols are simple and easy to implement, even if there is no connection equipment in the communication protocol library,
Can also simply create a corresponding protocol for communication.
The content of the communication protocol that can be created in the list,
Can also be simply edited MITSUBISHI FA-TB8XY3. Convert connector to screw relay terminal.
The action of the signal of the conversion module is shown in the light of the lamp.
Positive common end display. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output."Universal output function: source type.
Program capacity: 260K step MITSUBISHI FA-TB8XY3.
Basic operations processing speed: 9.5ns.
Communication interface: USB/Ethernet (built-in CC-Link function).
Program capacity: 20K step.
Control mode: stored procedure repeated operation.
Input / output points: 4096 points.
End cap.
High precision PWM control of the highest 200kHz MITSUBISHI AnyWireASLINK master module.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s MITSUBISHI AnyWireASLINK master module.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators.
CPU built-in functions can be easily set through programming tools.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool MITSUBISHI AnyWireASLINK mastter module FA-TB8XY3.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurrement MITSUBISHI FA-TB8XY3.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated ". "
Transmission speed: 230.4kbps.
MC protocol.
Communication protocol support function.
Can only be used on the ch1 side.
Device for immediate communication
Communication protocol support function through Works2 GX,
Can easily set the required agreement with the other equipment communication MITSUBISHI FA-TB8XY3.
In addition, only the communication protocol library is required to select the equipment to be carried out,
Immediate connection FA-TB8XY3
The creation and editing of communication protocols are simple and easy to implement, even if there is no connection equipment in the communication protocol library,
Can also simply create a corresponding protocol for communication.
The content of the communication protocol that can be created in the list,
Can also be simply edited MITSUBISHI FA-TB8XY3. Convert connector to screw relay terminal.
The action of the signal of the conversion module is shown in the light of the lamp.
Positive common end display. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output."Universal output function: source type.
Program capacity: 260K step MITSUBISHI FA-TB8XY3.
Basic operations processing speed: 9.5ns.
Communication interface: USB/Ethernet (built-in CC-Link function).
Program capacity: 20K step.
Control mode: stored procedure repeated operation.
Input / output points: 4096 points.
End cap.
High precision PWM control of the highest 200kHz MITSUBISHI AnyWireASLINK master module.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s MITSUBISHI AnyWireASLINK master module.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators.
CPU built-in functions can be easily set through programming tools.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool MITSUBISHI AnyWireASLINK mastter module FA-TB8XY3.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurrement MITSUBISHI FA-TB8XY3.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated ". "
...More relevant models >>>>
Last one: 
next one: Related download