Home
>> Products
>> MITSUBISHI
>> Inverter
>> Inverter accessories
>> FR-HEL-H55K AC reactor MITSUBISHI FR-HEL-H55K
FR-HEL-H55K AC reactor MITSUBISHI FR-HEL-H55K
Brand:
MITSUBISHI
Name: DC reactor
Model: FR-HEL-H55K
Power: 55kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.)
...More relevant models >>>>
Name: DC reactor
Model: FR-HEL-H55K
Power: 55kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.)
MITSUBISHI inverter FR-D740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 2.2KW.
The internal and back of the inverter structure considering the cooling effect, the relationship between the upper and lower ventilation is also important,
Therefore, in order for the type of unit, hanging on the wall to the vertical position, the installation of vertical as possible MITSUBISHI FR-HEL-H55K FR-HEL-H55K
Transducer can be used to drive a single phase motor? Can single phase power supply be used?
Basically can not be used. For a single phase motor with governor switch, the auxiliary winding will be burnt when the speed is below the operating point;
For the capacitor start or capacitor operation mode, the capacitor explosion will be induced MITSUBISHI FR-HEL-H55K.
The inverter power supply is usually 3, but the capacity for small, single-phase power is also useful functioning aircraft. "MITSUBISHI inverter series: FR-A846.
Voltage level: three phase 400V.
Power: 90kw.
SLD converter rated current: 260A.
Structure and function: IP55 counterpart.
Type: CA.
Substrate coating: have.
Built in DC reactor.
Easy to operate, simple settings MITSUBISHI FR-HEL-H55K.
We have prepared a series of equipment and functions for you to work in any place to meet the life cycle of the product.
Allegedly, the motor power consumption accounted for about half of the total power generated by manufacturing industry consumption MITSUBISHI AC reactor.
How to achieve energy efficiency in the plant without affecting the productivity.
Less energy consumption and more output FR-A800 series inverter will help you to have both fish and bear''s paw"
Parameters and frequency settings can be modified in the program MITSUBISHI AC reactor.
Inverter control, for example, by the input signal to trigger the operation of the inverter, based on the operation of the inverter
The status of the signal output, as well as the monitor output and so on, can be customized according to the requirements MITSUBISHI AC reactor.
The control of each machine can bee done separately by the frequency converter, and the control of the dispersion is also carried out FR-HEL-H55K.
Through combining with the real-time clock function can realize the automatic operation (in option FR-LU08). "Power: 7.5kw.
VVoltage: 400V MITSUBISHI FR-HEL-H55K.
The surge voltage of the motor can be suppressed when the 400V motor is driven by a frequency converter.
Motor suitable for 5.5 to 37kW.
Voltage level: three phase 400V.
Frequency converter capacity: 2.2KW.
The internal and back of the inverter structure considering the cooling effect, the relationship between the upper and lower ventilation is also important,
Therefore, in order for the type of unit, hanging on the wall to the vertical position, the installation of vertical as possible MITSUBISHI FR-HEL-H55K FR-HEL-H55K
Transducer can be used to drive a single phase motor? Can single phase power supply be used?
Basically can not be used. For a single phase motor with governor switch, the auxiliary winding will be burnt when the speed is below the operating point;
For the capacitor start or capacitor operation mode, the capacitor explosion will be induced MITSUBISHI FR-HEL-H55K.
The inverter power supply is usually 3, but the capacity for small, single-phase power is also useful functioning aircraft. "MITSUBISHI inverter series: FR-A846.
Voltage level: three phase 400V.
Power: 90kw.
SLD converter rated current: 260A.
Structure and function: IP55 counterpart.
Type: CA.
Substrate coating: have.
Built in DC reactor.
Easy to operate, simple settings MITSUBISHI FR-HEL-H55K.
We have prepared a series of equipment and functions for you to work in any place to meet the life cycle of the product.
Allegedly, the motor power consumption accounted for about half of the total power generated by manufacturing industry consumption MITSUBISHI AC reactor.
How to achieve energy efficiency in the plant without affecting the productivity.
Less energy consumption and more output FR-A800 series inverter will help you to have both fish and bear''s paw"
Parameters and frequency settings can be modified in the program MITSUBISHI AC reactor.
Inverter control, for example, by the input signal to trigger the operation of the inverter, based on the operation of the inverter
The status of the signal output, as well as the monitor output and so on, can be customized according to the requirements MITSUBISHI AC reactor.
The control of each machine can bee done separately by the frequency converter, and the control of the dispersion is also carried out FR-HEL-H55K.
Through combining with the real-time clock function can realize the automatic operation (in option FR-LU08). "Power: 7.5kw.
VVoltage: 400V MITSUBISHI FR-HEL-H55K.
The surge voltage of the motor can be suppressed when the 400V motor is driven by a frequency converter.
Motor suitable for 5.5 to 37kW.
...More relevant models >>>>
Last one: MITSUBISHI DC reactor FR-HEL-H45K
next one: MITSUBISHI High frequency braking resistor FR-ABR-H0.4K
Related download