LK Automation Limited
Home >> Products >> OMRON >> Relay >> Solid-state relay >> Solid state relay for heater >> G3PA-210B-VD DC5-24 OMRON G3PA-210B-VD DC5-24 Downsizing achieved through optimum design of heat sink 

G3PA-210B-VD DC5-24 OMRON G3PA-210B-VD DC5-24 Downsizing achieved through optimum design of heat sink 

Brand: OMRON
Name: Solid State Relays
Model: G3PA-210B-VD DC5-24
Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 10 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation).

Terminal (Wire connection): Screw terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: DC, 12V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel OMRON G3PA-210B-VD DC5-24.
Realized opening and closing ability with one pole 6 A slim shape G3PA-210B-VD DC5-24
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs OMRON G3PA-210B-VD DC5-24.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Classification: Models with built-in operation indicators.
Rated voltage: Standard products, 12, 24, 100/110, 110/120, 200/220,
or 220/240 VAC, 12, 24, 48, or 100/110 VDC; Made-to-order items, --.
New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays OMRON G3PA-210B-VD DC5-24.
Now lead-free to protect the environment.
VDE certification (Germany).
Different colors of coil tape for AC and,
DC models to more easily distinguish them.
MY(S) models with latching levers added for,
easier circuit checking OMRON Solid State Relays. Terminal (Wire connection): Screw terminal.
Classification: Microloads.
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 24V OMRON Solid State Relays.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated OMRON Solid State Relays.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Item: Basic model.
DPDT: Rated voltage, 24 VAC, 50 VAC, 100/(110) VAC,
200/(220) VAC, 12 VDC, 24 VDC, 100 VDC.
Unique Ratchet Mechanism Assures Positive.
Alternate Transfer/Switching Operation.
Each coontact in the double-pole contact mechanism performs G3PA-210B-VD DC5-24.
alternate make-brake operation at each pulse input and is thus.
ideal for alternate operation or transfer/switching operation of a motor.
Positive operation is assureed due to the unique ratchet mecha nism OMRON G3PA-210B-VD DC5-24.
Satisfies dielectric strength of 2,000 VAC.
Low power consumption.
(AC: approx. 6.4 VA; DC: approx. 3.9 W).


...More relevant models >>>>