Sale G3PA-260B-VD DC5-24 OMRON G3PA-260B-VD DC5-24

Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @ G3PA-260B-VD DC5-24.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock G3PA-260B-VD DC5-24
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices G3PA-260B-VD DC5-24.
(4-, 5-, and 6-contact models are available) .
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head. Sensor type and wiring: 2-wire DC 1-4/without polarity 3-4.
Actuator wiring: --.
No. of ports: 4.
No. of I/O: 4.
Simple Wiring of Sensor Actuators.
Greatly reduce wiring in combination with the Smartclick XS5 G3PA-260B-VD DC5-24.
Insert the connector and turn 1/8 of a turn to lock the connectors .
Higher rated current to enable output applications.
Use previous M12 screw connectors. Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Roller lever, high sensitivity.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Modeels with red LED indicators addded to series for easy,
confirmation of operation OMRON G3PA-260B-VD DC5-24.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Name: Position Control Module.
Model: CC2000H-NC112 OMRON G3PA-260B-VD DC5-24.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 1.
G3PA-260B-VD DC5-24 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G3PA-260B-VD DC5-24&select=5