G3RV-SR700-D DC12 OMRON Slim I/O Relay OMRON G3RV-SR700-D DC12

Number of elements: 3.
Isolation method: Phototriac coupler.
Rated powersupply voltage: 100 to 240 VAC.
Input method: No-voltage input (open and short circuited input).
Applicable monitor capacity (AC3): 3.7 kW (17.4 A), 200 to 220 VAC.
Monitor output: AC switching output.
New Models with AC Power Supply Input and,
Monitor Output Equivalent to Non-contact,
SPST-NO Join the G3J-T Series,
Limiting the starting current saves energy OMRON G3RV-SR700-D DC12 G3RV-SR700-D DC12
Certified for UL and CSA.
Mounts with screws or to DIN Track.
Compact design with heat sinks (3.7-kW models: 100 × 100 ×130 mm (W × H × D)).
Built-in snubber circuit and thyristor.
Built-in operation indicator. Terminal (wire connection): Screw terminal OMRON G3RV-SR700-D DC12.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON G3RV-SR700-D DC12.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires OMRON Slim I/O Relay.
Screw terminal is also stocked to meet the screw type needs OMRON Slim I/O Relay.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Control terminal block: Screwless clamp terminal block.
Type: Standard.
Capacity: 20 A, 100 to 240 VAC.
Heater burnout detection: No.
Communications: No.
High-precision Control with Easy Setup,
Precise heater burnout detection OMRON Slim I/O Relay.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RSS-485 communications to set manipulated variables and,
monitor load current G3RV-SR700-D DC12.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,,
and constant-current control OMRON G3RV-SR700-D DC12.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified.