G3S4 Series OMRON G3S4 Series sockets, and heat sink in one unit Terminal SSR

Number of elements: 2.
Insulation method: Phototriac.
Rated supply voltage: 12 to 24 VDC.
Applicable motor: 2.2 kW (11.1 A), 200 to 220 VAC.
Solid State Contactors That Can Drive 3-phase Motors Frequently,
and Achieve Harmonized Protection with Thermal.
Overload Relays.
Certified for UL and CSA OMRON G3S4 Series.
Mount with screws or to DIN tracks.
Compact monoblock construction (W: 80 × H: 100 × D: 100 mm) G3S4 Series
with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.
Two-element models added to series. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 30 A at 180 to 400 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks OMRON G3S4 Series.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load OMRON G3S4 Series.
Certified by UL, CSA, and VDE (reinforced insulation). Isolation: Phototriac Coupler.
Zero cross function: Yes.
Indicator: Yes(Yellow).
Applicable output load (See note 1.): 5 A at 24 to 240 VAC(See note 2 OMRON Terminal SSR. ).
Rated input voltage: 5 to 24 VDC.
Wide Lineup of General-purpose Solid State.
Relays with Applicable Loads of 5 to 90 A.
AC Output Relays with 75-A and 90-A output currents have been,
added to the G3NA Series OMRON Terminal SSR.
All models feature the same compact dimensions to provide a,
uniform mounting pitch.
Built-in varistor effectively absorbs external surges.
(except G3NA-D210B).
Operation indicator enables monitoring operation.
Protective cover for greater safety OMRON Terminal SSR.
Standard models certified by UL and CSA and -UTTU models by TÜV G3S4 Series.
(except G3NA-410B, G3NA-420B, and G3NA-440B(-2)). Structure: single stable type.
Contact structure: 1a.
Structure: high flux protection.
Coil rated voltage: DC5V.
Voltage resistant 10kV 1 pole 3A open close ssmall relay OMRON G3S4 Series.
High power electromagnetic loop is used to achieve high sensitivity (200mW).
Small relays, but can ensure the impact resistance of 10kV.