GP2000-CBLQ/5M-01 Proface GP2000-CBLQ/5M-01

Extension cable for connecting USB (Type-A) interface to front panel.Converting 4 analog signals into digital signalsThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.A veneer, for the GP4000 series back loading models of full flush (white, 1)12 Proface GP2000-CBLQ/5M-01. 1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function GP2000-CBLQ/5M-01Connector for connecting a serial port (1)For connecting GP operation data with RS-422 and power /DIO terminals.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch screen anti ultraviolet protective film (1 pieces) Proface GP2000-CBLQ/5M-01. Apply to GLC-2600/2500COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. 2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface GP2000-CBLQ/5M-01. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationData transmission cable between host and LT series Proface MITSUBISHI Q series PLCCPU interface cable. Length: 5 meters.7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)Suitable for GLC2300 seriesDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface MITSUBISHI Q series PLCCPU interface cable. For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface MITSUBISHI Q series PLCCPU interface cable. Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block GP2000-CBLQ/5M-01. COM1 interface with the cable for direct connection to the CPU series PLC AFor 3.8 inch models, connect the connector to the DIO interface. For connecting exterrnal I/O devices Proface GP2000-CBLQ/5M-01. (5 / set)Used in a variety of host and man-machine interface for RS-422 connectionA1/A2/B+ DIO Type connector (welding type) (5 / set)