PSM-PRCB00 Proface PSM-PRCB00 Printer cable

USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Converting SIO to RS-422 terminal blockWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel Proface PSM-PRCB00. LT4000M (module type DIO), PNP output, DC24V (host) PSM-PRCB00A connector that connects the DIO interface for connecting an external I/O device (5 sets).Touch screen anti ultraviolet protective film (1 pieces).7.4 inches, installed to provide the function of dust and moistureUsed in a variety of host and man-machine interface for RS-232C connectionUsed for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointConnect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2One end is a loose wire, which is used to carry out RS-485 connection between the host and LT Proface PSM-PRCB00. 5.7 inch screen protective cover (1 pieces)The nut for mounting the display module (10 / set).Touch screen anti ultraviolet protective film (1 pieces) Proface PSM-PRCB00. Touch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface Printer cable. The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication Proface Printer cable. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionSuitable for A/B+ Type models12.1 inch screen protective cover (1 pieces)10 Proface Printer cable. 4 inches (TFT), the replacement of the host backlight (1).Used to interface the main maachine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block PSM-PRCB00. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface PSM-PRCB00. Portable GP2000H series models accessories, RS-232 single head cable (3 m).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).