GP2000H-C232-10M Proface RS-232 single head cable Proface GP2000H-C232-10M

Converting 2 analog signals into digital signalsUsed to output the image signal from the host computer to GP5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface GP2000H-C232-10M GP2000H-C232-10M Interface module for the simultaneous use of A/QnA/FX series external controller10.4 inch screen protective cover (1 pieces)To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)12 way 2 digital signals into analog signals and output resultsFor the operation screen (5 pieces) (GP3000H standard) Proface GP2000H-C232-10M. Length: 5 meters.Length: 3 meters10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Used for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface GP2000H-C232-10M. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Backup battery for time and data backup (1).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface RS-232 single head cable. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) Proface RS-232 single head cable. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Use external output for the GP3000 series of auxiliary connectors (5 / sets) Proface RS-232 single head cable. The PC adapter for PCMCIA slot read CF card required.For RGB input USB cable to prrevent disconnection (2 / set)For thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)COM 2 interface with the cable, for the conversion of the D-Sub 9 pinn concave joint to the D-Sub 25 pin convex connectorThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface GP2000H-C232-10M GP2000H-C232-10M.