H7ET-N1-B OMRON H7ET-N1-B Dual time range: 9999999 ←→ 3999d239h or,

Operating method: Incrementing, decrementing, and reversible (UP/DOWN A to F).
Mounting method: Flush mounting.
Input signal method (Count and reset inputs): Contact and transistor input, voltage (H and L).
Memory backup: No.
Display: Yes (8-mm high 7-segment LED).
Models: 6 digits.
A DIN 72 x 72 mm Best-selling Counter OMRON H7ET-N1-B.
Easy setting with thumbwheel switches.
A draw-out construction enables maintenance without rewiring H7ET-N1-B
Models with 2-, 4-, 6-, or 8-digit displays are also available.
Total Counter models are also Available.
Complies with UL and CSA Marking. Wiring: Screw terminals.
Backup power supply function for memory protection:
Provided (approx. 10 years at 25°C).
No. of program steps: 24 (Each ON or OFF is considered to be one step OMRON H7ET-N1-B. ).
Weekly Control with a Large Time Display,
Easy Programming with Large Display and Interactive,
Functions.
Easy operation with five keys.
Up to 24 steps of ON/OFF operations can be set.
Power supply freely selectable from 100 to 240 VAC.
Memory protection during power failure for up to 10 years.
Certified for UL and CSA safety standards OMRON H7ET-N1-B.
The same setting can be used for multiple-day operation and,
timer operation. Supply voltage: 24 to 230 VAC (50/60Hz)/24 to 48 VDC.
Control output: Contact output: SPDT (time-limit output SPDT).
Input type: Voltage input.
Operating mode(see note): Eight multi-modes: A, B, B2, C, D, E, G, J OMRON Self-powered Time Counter.
Model: Screw terminal type.
Eight operating modes (H3DS-M) and four operating modes,
(H3DS-S) cover a wide range of applications OMRON Self-powered Time Counter.
A wide time setting range of 0.10 s to 120 h.
Two LEDs indicate power and relay status respectively. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA OMRON Self-powered Time Counter.
Relay contact: OUT5; OUT31c, OUT4, OUT2, OUT1: each 1a.
96 (W) ** 48 (H * 95mm) depth H7ET-N1-B.
Power supply voltage: AC/DC24V.
High speed pulse.
Measuring, increasing or decreasing pulse meter.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and alll kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase difference pulse is 25kHz, increase or decrease of pulse is 30kHz