Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-J2 series
>> HC-(KF/SF/MF/RF/UF)，HA-(LF/FF) motor
>> HA-LF30K14 Low inertia medium and small capacity motor MITSUBISHI HA-LF30K14 The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
HA-LF30K14 Low inertia medium and small capacity motor MITSUBISHI HA-LF30K14 The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
Brand:
MITSUBISHI
Name: Low inertia medium capacity motor
Model: HA-LF30K14
Motor series: low inertia, medium capacity.
Rated output power: 30.0kw.
Rated speed: 1000rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
...More relevant models >>>>
Name: Low inertia medium capacity motor
Model: HA-LF30K14
Motor series: low inertia, medium capacity.
Rated output power: 30.0kw.
Rated speed: 1000rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.05kw.
Rated speed: 3000rpm.
With a brake band.
Shaft end: straight shaft.
AC servo motor and brushless DC servo motor in the function of the difference: AC servo is better, because it is a sine wave control, torque ripple small MITSUBISHI HA-LF30K14.
DC servo is a trapezoidal wave. DC servo is simple and cheap HA-LF30K14 Drive: MR-H_AN series.
Rated output: 22KW.
Universal AC servo.
Servo driver (drives servo) also known as the "servo controller", "servo amplifier",
Is a kind of controller used to control the servo motor. Its function is similar to that of the frequency converter,
Belongs to a part of the servo system, which is mainly used in high precision positioning system MITSUBISHI HA-LF30K14.
In general, the servo motor is controlled by position, speed and torque in three ways,
To achieve high precision positioning of the transmission system, the current transmission technology is the high-end products.
Servo drive is an important part of modern motion control,
Is widely used in industrial robots and CNC machining centers and other automation equipment MITSUBISHI HA-LF30K14.
In particular, it has become a hot research topic in the field of servo drives for the control of AC permanent magnet synchronous motor.
Current, speed and position 3 closed loop control algorithm based on vector control is widely used in AC servo drive system.
The speed closed-loop design of the algorithm is reasonable or not, for the entire servo control system,
Especially the speed control performance plays a key role MITSUBISHI Low inertia medium and small capacity motor MITSUBISHI Low inertia medium and small capacity motor. A set of power connectors for use in
HC-SFS121; 201; 301.
HC-SFS202; 352; 502; 2024; 3524; 5024.
HC-SFS203; 353.
HC-LFS202; 302.
HC-RFS353; 503.
HA-LFS502.
HC-UFS202; 352; 502.
For MR-J2S-11KA (4) MR-J2S-22KA to (4). The length of the line: 0.3m MITSUBISHI Low inertia medium and small capacity motor.
The cable is not shielded.
Encoder with cable (motor side), for the HF-KP/HF-MP series (motor shaft with side extraction). Cable length: 1.0M. Used in MR-J2S-700B (4) or lessMotor series: medium inertia, medium power.
Rated output power: 1.5kw.
Rated speed: 2000r/min.
Whether to take the brake: No.
Shaft keyway: (open slot).
Protection level: IP65 (IP67).
Features: medium inertia from low speeed to high speed three modes for selection, suitable for different applications HA-LF30K14.
Application examples: transmission machinery, robots, X-Y working platform.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesolution ensures excellent performance and stability at low speed MITSUBISHI HA-LF30K14.
All motor dimensions are the same as before and all are compatible with the wiring.
Using a serial absolute / incremental encoder.
Rated output power: 0.05kw.
Rated speed: 3000rpm.
With a brake band.
Shaft end: straight shaft.
AC servo motor and brushless DC servo motor in the function of the difference: AC servo is better, because it is a sine wave control, torque ripple small MITSUBISHI HA-LF30K14.
DC servo is a trapezoidal wave. DC servo is simple and cheap HA-LF30K14 Drive: MR-H_AN series.
Rated output: 22KW.
Universal AC servo.
Servo driver (drives servo) also known as the "servo controller", "servo amplifier",
Is a kind of controller used to control the servo motor. Its function is similar to that of the frequency converter,
Belongs to a part of the servo system, which is mainly used in high precision positioning system MITSUBISHI HA-LF30K14.
In general, the servo motor is controlled by position, speed and torque in three ways,
To achieve high precision positioning of the transmission system, the current transmission technology is the high-end products.
Servo drive is an important part of modern motion control,
Is widely used in industrial robots and CNC machining centers and other automation equipment MITSUBISHI HA-LF30K14.
In particular, it has become a hot research topic in the field of servo drives for the control of AC permanent magnet synchronous motor.
Current, speed and position 3 closed loop control algorithm based on vector control is widely used in AC servo drive system.
The speed closed-loop design of the algorithm is reasonable or not, for the entire servo control system,
Especially the speed control performance plays a key role MITSUBISHI Low inertia medium and small capacity motor MITSUBISHI Low inertia medium and small capacity motor. A set of power connectors for use in
HC-SFS121; 201; 301.
HC-SFS202; 352; 502; 2024; 3524; 5024.
HC-SFS203; 353.
HC-LFS202; 302.
HC-RFS353; 503.
HA-LFS502.
HC-UFS202; 352; 502.
For MR-J2S-11KA (4) MR-J2S-22KA to (4). The length of the line: 0.3m MITSUBISHI Low inertia medium and small capacity motor.
The cable is not shielded.
Encoder with cable (motor side), for the HF-KP/HF-MP series (motor shaft with side extraction). Cable length: 1.0M. Used in MR-J2S-700B (4) or lessMotor series: medium inertia, medium power.
Rated output power: 1.5kw.
Rated speed: 2000r/min.
Whether to take the brake: No.
Shaft keyway: (open slot).
Protection level: IP65 (IP67).
Features: medium inertia from low speeed to high speed three modes for selection, suitable for different applications HA-LF30K14.
Application examples: transmission machinery, robots, X-Y working platform.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesolution ensures excellent performance and stability at low speed MITSUBISHI HA-LF30K14.
All motor dimensions are the same as before and all are compatible with the wiring.
...More relevant models >>>>
Last one: MITSUBISHI Low inertia medium capacity motor HA-LF37K1
next one: MITSUBISHI Low inertia medium capacity motor HA-LF37K14
Related download