Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-J3 series
>> MR-J3 amplifier
>> MR-J3-10B-RJ004 MITSUBISHI MR-J3-10B-RJ004
MR-J3-10B-RJ004 MITSUBISHI MR-J3-10B-RJ004
Brand:
MITSUBISHI
Name: Suitable for linear servo motor drive
Model: MR-J3-10B-RJ004
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.1kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor.
Power specification: single phase AC200V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically.
32 segment response level can be set.
Advanced vibration suppression control.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops.
The automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine.
...More relevant models >>>>
Name: Suitable for linear servo motor drive
Model: MR-J3-10B-RJ004
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.1kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor.
Power specification: single phase AC200V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically.
32 segment response level can be set.
Advanced vibration suppression control.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops.
The automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine.
Motor: HA-LH type.
Power: 5.0kw.
Speed: 2000r/min.
According to the types of power supply: can be divided into DC motor and AC motor.
The structure and working principle of DC motor can be divided into four parts: brushless DC motor and brushless DC motor.
Brushless DC motor can be divided into: permanent magnet DC motor and DC motor MITSUBISHI MR-J3-10B-RJ004.
DC Motor Division: Series DC motor, DC motor, DC motor and DC motor MR-J3-10B-RJ004
Permanent magnet DC Motor Division: rare earth permanent magnet DC motor, ferrite permanent magnet DC motor and aluminum nickel Gu Yongci DC motor. Motor series: low inertia, medium capacity.
Rated output power: 12.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft MITSUBISHI MR-J3-10B-RJ004.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MITSUBISHI MR-J3-10B-RJ004. Connector kit for motor power supply; used in
HF-SP121; 201; 301; 202; 352;
502; 2024; 3524; 5024
HF-JP353; 503Type: general purpose AC servo amplifier MR-E series.
Rated output: 2.0kw.
Interface type: analog input interface.
KH003 special mark for Super MR-E.
Servo amplifier terminals are used to reduce the required wiring time MITSUBISHI Full closed loop control driver.
The connector is located in front of the servo amplifier, which is convenient for cable connection MITSUBISHI Full closed loop control driver.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment MITSUBISHI Full closed loop control driver. Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 7.0kw.
Rated speed: 2000rpm.
With a brake band.
Shaft end: straight shaft.
The rotor of AC servo motor is usually made of squirrel cage, but in order to make the servo motor has a wide range of speed regulation, linear mechanical properties,
Without the "rotation" phenomenon and the performaance of the fast response, it is compared with the ordinary motor,
The two characteristics of rotor resistance and moment of inertia should be provided MR-J3-10B-RJ004.
At present, there are two kinds of rotor structure, one is the squirrrel cage rotor, which is made of conductive material with high resistivity,
In order to reduce the moment of inertia of the rotor, the rotor is slender MITSUBISHI MR-J3-10B-RJ004.
Power: 5.0kw.
Speed: 2000r/min.
According to the types of power supply: can be divided into DC motor and AC motor.
The structure and working principle of DC motor can be divided into four parts: brushless DC motor and brushless DC motor.
Brushless DC motor can be divided into: permanent magnet DC motor and DC motor MITSUBISHI MR-J3-10B-RJ004.
DC Motor Division: Series DC motor, DC motor, DC motor and DC motor MR-J3-10B-RJ004
Permanent magnet DC Motor Division: rare earth permanent magnet DC motor, ferrite permanent magnet DC motor and aluminum nickel Gu Yongci DC motor. Motor series: low inertia, medium capacity.
Rated output power: 12.0kw.
Rated speed: 1000rpm.
With the brake: without.
Shaft end: straight shaft MITSUBISHI MR-J3-10B-RJ004.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) MITSUBISHI MR-J3-10B-RJ004. Connector kit for motor power supply; used in
HF-SP121; 201; 301; 202; 352;
502; 2024; 3524; 5024
HF-JP353; 503Type: general purpose AC servo amplifier MR-E series.
Rated output: 2.0kw.
Interface type: analog input interface.
KH003 special mark for Super MR-E.
Servo amplifier terminals are used to reduce the required wiring time MITSUBISHI Full closed loop control driver.
The connector is located in front of the servo amplifier, which is convenient for cable connection MITSUBISHI Full closed loop control driver.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment MITSUBISHI Full closed loop control driver. Motor series: medium inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 7.0kw.
Rated speed: 2000rpm.
With a brake band.
Shaft end: straight shaft.
The rotor of AC servo motor is usually made of squirrel cage, but in order to make the servo motor has a wide range of speed regulation, linear mechanical properties,
Without the "rotation" phenomenon and the performaance of the fast response, it is compared with the ordinary motor,
The two characteristics of rotor resistance and moment of inertia should be provided MR-J3-10B-RJ004.
At present, there are two kinds of rotor structure, one is the squirrrel cage rotor, which is made of conductive material with high resistivity,
In order to reduce the moment of inertia of the rotor, the rotor is slender MITSUBISHI MR-J3-10B-RJ004.
...More relevant models >>>>
Last one: MITSUBISHI Full closed loop control driver MR-J3-22KB4-RJ006
next one: MITSUBISHI Suitable for linear servo motor drive MR-J3-20B-RJ004
Related download