OMRON E2G-M12KN08-WP-D1 Non polar proximity sensor Cylindrical proximity sensor E2G-M12KN08-WP-D1

Appearance: Noise-resistant Models, Unshielded 34 dia.
Sensing distance: 20 mm [3 to 20 mm *].
Model: Output configuration, AC/DC 2-wire;
Operation mode, NO.
Long-distance Capacitive Sensor.
with Adjustable Sensitivity.
CE Marking for DC 3-wire models and AC/DC 2-wire models.
Noise-resistant models are also available for environments with,
strong noise OMRON E2G-M12KN08-WP-D1. Appearance: Unshielded, M30 E2G-M12KN08-WP-D1
Sensing distance: 30 mm.
Model: NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. E3JM-10M4 detection methods: the firing pattern,
Connection: terminal plate,
Detection range: 10m OMRON E2G-M12KN08-WP-D1.
Output status: ON into the light; light shading ON; switch conversion type.
Output: relay.
2 types of cost reductionE32-S15-1 fiber unit uses OMRON''s original polarized light multilayer technology (FAO)
Can not be affected by the color of the workpiece, the subtle luster
To carry out a stable testFitting materials: Stainless steel (SUS304) OMRON E2G-M12KN08-WP-D1.
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OMRON Cylindrical proximity sensor OMRON Cylindrical proximity sensor.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9. Appearance: Standard.
Sensing method: Through beam (with slot) OMRON Cylindrical proximity sensor.
Sensing distance: 5 mm (slot width).
Output configuration: Light-ON Dark-ON (2 outputs).
Connection method (Cable length): Pre-wired model with standard cable (1 m).
Output type: PNP.
Meeting Customer Needs with.
Ultra-compact Sensors that Mount.
with M3 Screews E2G-M12KN08-WP-D1.
Mount using M3 or M2 screws.
Reliable sensing slot depth of 6.5 mm.
Indication of sensing window for easy confirmation of,
insertion depth.
Bright indicator for confirmation from many directions.
Both light-ON and dark-ON outputs provided OMRON E2G-M12KN08-WP-D1.
All models available with either standard cable or,
flexible robot cable.
Load short-circuit protection circuit provided.