LK Automation Limited
Home >> Products >> OMRON >> Power/other peripheral devices >> Power / equipment protection equipment >> Protective equipment for equipment >> OMRON K8AK-VW3 24VAC/DC Single-phase Overvoltage/Undervoltage Relay OMRON K8AK-VW3 24VAC/DC

OMRON K8AK-VW3 24VAC/DC Single-phase Overvoltage/Undervoltage Relay OMRON K8AK-VW3 24VAC/DC

Brand: OMRON
Name: Single-phase Overvoltage/Undervoltage Relay
Model: K8AK-VW3 24VAC/DC
Setting range: 20 to 200 V AC/DC, 30 to 300 V AC/DC, 60 to 600 V AC/DC.
Power supply voltage: 24 VAC/DC.
Ideal for Voltage Monitoring for.
Industrial Facilities and Equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and undervoltages.
Manual resetting and automatically resetting supported by one Relay.
Pre-alarm Monitoring Mode.
Two SPDT output relays, 5 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.

Models: OVGR (64).
Protection of distributed power supply connection to power system,
The relay is smaller, and the protection unit is more enriched.
Waste heat generation system improve the comprehensive energy efficiency and the use of natural,
Energy of wind power generation, the spread of power is becoming more and more popular OMRON K8AK-VW3 24VAC/DC.
This relay is used to detect the internal fault of the user in the distributed power supply,
Power line accident of distributed power supply and relay protection system K8AK-VW3 24VAC/DC
The relay can be meet in Japan (system connected instant points specified in the standard model),
Function, can be through more than 20 kinds of products to establish the best protection system OMRON K8AK-VW3 24VAC/DC.
Can also correspond to the generator and the electric side / internal tributaries.
Unit with 2 relay elements.
In each unit, the variable action time circuit is hidden, so that the coordination design is more convenient.
All aircraft equipped with a locking relay terminal.
DSR can correctly determine the direction of the sudden drop in the voltage to 0 of the short-circuit accident.
2 stage cross terminal stand with cover with convenient wiring OMRON K8AK-VW3 24VAC/DC. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase) OMRON Single-phase Overvoltage/Undervoltage Relay.
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase OMRON Single-phase Overvoltage/Undervoltage Relay.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction OMRON Single-phase Overvoltage/Undervoltage Relay.
Note: If the K2CM is used with an inverter, the operating conditionss will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions K8AK-VW3 24VAC/DC. Error will occur in the operating,
values of the overload elements. It is recommended to test operation, Cable leength L: A, 3 OMRON K8AK-VW3 24VAC/DC. 0 m; B, 2.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch.


...More relevant models >>>>