Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Connection /Save wiring equipment
>> Connector terminal station conversion unit
>> XW2B-20G4 OMRON XW2B-20G4 Simplifies Connector and terminal, Standard-type Connector-Terminal Block Conversion Units
XW2B-20G4 OMRON XW2B-20G4 Simplifies Connector and terminal, Standard-type Connector-Terminal Block Conversion Units
Brand:
OMRON
Name: Standard-type Connector-Terminal Block Conversion Units
Model: XW2B-20G4
Type: Flat Cable.
Terminal Block: Terminal block with M3 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 20.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately).
...More relevant models >>>>
Name: Standard-type Connector-Terminal Block Conversion Units
Model: XW2B-20G4
Type: Flat Cable.
Terminal Block: Terminal block with M3 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 20.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately).
Control power supply voltage: 200/220 VAC.
Input: DC or AC (selectable), Input voltage range, 10 to 300 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL) OMRON XW2B-20G4.
Detect three-phase AC current for under and/or overcur,
rent using current converter XW2B-20G4
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F) OMRON XW2B-20G4.
LED operation indicator.
UL/CSA approval (SDV-F@). Appearance: insert type.
Control supply voltage: DC48V.
Action elements: overload detection.
Action characteristic: lock, instant action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection OMRON XW2B-20G4.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc., are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple OMRON Standard-type Connector-Terminal Block Conversion Units.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple OMRON Standard-type Connector-Terminal Block Conversion Units. Cable specifications: Fire-retardant, Robot cable.
Cable length L: 2 m.
Cable outer diameter: 6 mm.
Angled Connectors.
Minimum order: 5.
UL: Yes.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors OMRON Standard-type Connectoor-Terminal Block Conversion Units XW2B-20G4.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full liine-up of models is planned OMRON XW2B-20G4.
Connectors with Cables are UL approved. High precision inspection and best teaching,
And equipped with feedback function.
Input: DC or AC (selectable), Input voltage range, 10 to 300 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL) OMRON XW2B-20G4.
Detect three-phase AC current for under and/or overcur,
rent using current converter XW2B-20G4
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F) OMRON XW2B-20G4.
LED operation indicator.
UL/CSA approval (SDV-F@). Appearance: insert type.
Control supply voltage: DC48V.
Action elements: overload detection.
Action characteristic: lock, instant action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection OMRON XW2B-20G4.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc., are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple OMRON Standard-type Connector-Terminal Block Conversion Units.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple OMRON Standard-type Connector-Terminal Block Conversion Units. Cable specifications: Fire-retardant, Robot cable.
Cable length L: 2 m.
Cable outer diameter: 6 mm.
Angled Connectors.
Minimum order: 5.
UL: Yes.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors OMRON Standard-type Connectoor-Terminal Block Conversion Units XW2B-20G4.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full liine-up of models is planned OMRON XW2B-20G4.
Connectors with Cables are UL approved. High precision inspection and best teaching,
And equipped with feedback function.
...More relevant models >>>>
Last one: OMRON Standard-type Connector-Terminal Block Conversion Units XW2B Series
next one: OMRON Standard-type Connector-Terminal Block Conversion Units XW2B-34G4
Related download