Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Connection /Save wiring equipment
>> Connector terminal station conversion unit
>> XW2R-E34G-C3 Connector terminal station conversion unit OMRON XW2R-E34G-C3
XW2R-E34G-C3 Connector terminal station conversion unit OMRON XW2R-E34G-C3
Brand:
OMRON
Name: Connector terminal station conversion unit
Model: XW2R-E34G-C3
Type: slotted screw type.
IO points (number of poles): 34.
The PLC connection type and the rich polar number of PLC are specially connected.
PLC connection type for the use of OMRON and MITSUBISHI motor,
PLC (plant) production of specialized connection wiring mode, to facilitate the confirmation signal configuration.
In addition, the terminal table record PLC address on the label.
Universal type for a variety of connectors, the number of species.
Connection with cross recessed screws, slotted screw type and insertion type.
DIN guide rail and screw can be used to install.
Terminal arrangement fully considers the maneuverability, makes the connection operation become easy and simple.
The operability of the plug-in terminal can be improved (XW2F comparison of the company).
...More relevant models >>>>
Name: Connector terminal station conversion unit
Model: XW2R-E34G-C3
Type: slotted screw type.
IO points (number of poles): 34.
The PLC connection type and the rich polar number of PLC are specially connected.
PLC connection type for the use of OMRON and MITSUBISHI motor,
PLC (plant) production of specialized connection wiring mode, to facilitate the confirmation signal configuration.
In addition, the terminal table record PLC address on the label.
Universal type for a variety of connectors, the number of species.
Connection with cross recessed screws, slotted screw type and insertion type.
DIN guide rail and screw can be used to install.
Terminal arrangement fully considers the maneuverability, makes the connection operation become easy and simple.
The operability of the plug-in terminal can be improved (XW2F comparison of the company).
Input voltage: 400 ~ 500 VAC3 phase.
Rated power: 960W.
Output voltage: 24V.
Output current: 40A.
DIN guide rail installation, with 5 A ~ 40 A output current of the power supply.
3 phase 400 ~ 500 VAC.
5, 10, 20 and 40 A; 24 VDC output.
High stability, low ripple and low noise level.
Compact design.
Add fuse protection OMRON XW2R-E34G-C3.
Natural draft。
In addition to the CE tag, but also in compliance with UL60950 (CSA22 XW2R-E34G-C32-60950), UL508.
Conform to EN61000-3-2.
Parallel / series operation. Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: No.
Features: Flip-flop function with two inputs/one output.
Offers High-speed Input Response of,
0.1 ms and Equipped with Built-in Timer,
High-speed response of 0 OMRON XW2R-E34G-C3. 1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Power source for the Sensor can be supplied up to 200 mA.
Ultra-slim body with 30-mm width.
Multi-function model equipped with timer functions also available OMRON XW2R-E34G-C3. Measuring voltage: 20 to 200 V AC/DC, 30 to 300 V AC/DC, 60 to 600 V AC/DC.
Supply voltage: 100-115 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and automatically resetting supported by one Relay OMRON Connector terminal station conversion unit.
One SPDT output relay, 6 A at 250 VAC (resistive load) OMRON Connector terminal station conversion unit.
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Cable type: Standard Cables OMRON Connector terminal station conversion unit.
Type: Cable with Plugs on Both Ends (M12 Right-angle/RJ45).
Cable length: 15 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Type: slotted screw type.
IO points (number of poles): 34.
The PLC connection type and the rich polar number of PLC are specially connected.
PLC connection type for the use of OMRON and MITSUBISHI motor,
PLC (plant) production of specialized connection wiring mode, to facilitate the confirmation signal configuration.
In addition, the terminal table record PLC address on the label.
Universal type foor a variety of connectors, the number of species XW2R-E34G-C3.
Connection with cross recessed screws, slotted screw type and insertion type.
DIN guide rail and screw can be used to install.
Terminal arrangement fully considers the maneuverabiility, makes the connection operation become easy and simple OMRON XW2R-E34G-C3.
The operability of the plug-in terminal can be improved (XW2F comparison of the company).
Rated power: 960W.
Output voltage: 24V.
Output current: 40A.
DIN guide rail installation, with 5 A ~ 40 A output current of the power supply.
3 phase 400 ~ 500 VAC.
5, 10, 20 and 40 A; 24 VDC output.
High stability, low ripple and low noise level.
Compact design.
Add fuse protection OMRON XW2R-E34G-C3.
Natural draft。
In addition to the CE tag, but also in compliance with UL60950 (CSA22 XW2R-E34G-C32-60950), UL508.
Conform to EN61000-3-2.
Parallel / series operation. Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: No.
Features: Flip-flop function with two inputs/one output.
Offers High-speed Input Response of,
0.1 ms and Equipped with Built-in Timer,
High-speed response of 0 OMRON XW2R-E34G-C3. 1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Power source for the Sensor can be supplied up to 200 mA.
Ultra-slim body with 30-mm width.
Multi-function model equipped with timer functions also available OMRON XW2R-E34G-C3. Measuring voltage: 20 to 200 V AC/DC, 30 to 300 V AC/DC, 60 to 600 V AC/DC.
Supply voltage: 100-115 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages or undervoltages.
Manual resetting and automatically resetting supported by one Relay OMRON Connector terminal station conversion unit.
One SPDT output relay, 6 A at 250 VAC (resistive load) OMRON Connector terminal station conversion unit.
Output relay can be switched between normally open and normally closed.
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Cable type: Standard Cables OMRON Connector terminal station conversion unit.
Type: Cable with Plugs on Both Ends (M12 Right-angle/RJ45).
Cable length: 15 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Type: slotted screw type.
IO points (number of poles): 34.
The PLC connection type and the rich polar number of PLC are specially connected.
PLC connection type for the use of OMRON and MITSUBISHI motor,
PLC (plant) production of specialized connection wiring mode, to facilitate the confirmation signal configuration.
In addition, the terminal table record PLC address on the label.
Universal type foor a variety of connectors, the number of species XW2R-E34G-C3.
Connection with cross recessed screws, slotted screw type and insertion type.
DIN guide rail and screw can be used to install.
Terminal arrangement fully considers the maneuverabiility, makes the connection operation become easy and simple OMRON XW2R-E34G-C3.
The operability of the plug-in terminal can be improved (XW2F comparison of the company).
...More relevant models >>>>
Last one: OMRON Connector terminal station conversion unit XW2R-E34G-C2
next one: OMRON Connector terminal station conversion unit XW2R-E34G-C4
Related download