ZC9USCBMB1 Proface ZC9USCBMB1 Data transmission USB cable (Type-A/Mini-B) (18 m)

Touch screen anti ultraviolet protective film (1 pieces).10.4 inches and above, used to connect the power cord (5 / set).The nut for mounting the display module (10 / set).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters Proface ZC9USCBMB1. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10 ZC9USCBMB14 inch GP2500 (TFT) in the installation of the required accessories.Clock battery, save system date and time when power is off.Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).Connect to PC, transfer screen data and user programs Proface ZC9USCBMB1. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.Direct interface Matsushita Electric PLC FP series CPU port.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface ZC9USCBMB1.
Length: 3 meters. COM2 terminal adapter for communication through the RS-422/485 connectionScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interface3.4 Inch Touch Screen anti UV protective film (1 pieces).Apply to GLC-2600/2500Used to prevent accidental operation Proface Data transmission USB cable (Type-A/Mini-B) (1.8 m). Includes 3 mounting screws.The module is used for mounting on the back board of the GLC2000 series host computer Proface Data transmission USB cable (Type-A/Mini-B) (1.8 m). Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.COM1 interface with the cable for direct connection to the CPU series PLC AUsed in a variety of host and man-machine interface for RS-422 connection12 Proface Data transmission USB cable (Type-A/Mini-B) (1.8 m). 1 inch /10.4 inch ((STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) ZC9USCBMB1. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader tthat can be connected to support RS-232C Proface ZC9USCBMB1. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)