CA6-USB232-01 Proface CA6-USB232-01 USB/RS-232C conversion cable (05 m)

10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Connector for connecting a serial port (1)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)One end is a loose wire, which is used to carry out RS-232C connection between the host and LT Proface CA6-USB232-01 CA6-USB232-01 A veneer, for the GP4000 series back loading models of full flush (white, 1)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Touch screen anti ultraviolet protective film (1 pieces) Proface CA6-USB232-01. 10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Colorful LED switch with USB interface.The module is used for mounting on the back board of the GLC2000 series host computer. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side Proface CA6-USB232-01. 3.5 inch screen protective cover (1 pieces)LT4000M (module type analog), NPN output, DC24V (host).The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication Proface USB/RS-232C conversion cable (0.5 m). For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Cable for connecting GP3000 to various modulesSuitable for LT4000M/GP4000M series modules, 5 Proface USB/RS-232C conversion cable (0.5 m). 7 inch. For 5.7 inch models, for fixing the hooks of the three EX modules.Portable GP2000H series models accessories, RS-422 single head cable (3 m).Touch screen anti ultraviolet protective film (1 pieces).Cable for connecting GP3000 to various modules12 Proface USB/RS-232C conversion cable (0.5 m). 1 inches /10.4 inches (STTN), the GP installed to the hard panel to provide dust and moisture proof function CA6-USB232-01. Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Direct interface Matsushita Electric PLC FP series CPU pport Proface CA6-USB232-01. 512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.