MITSUBISHI
Melsecnet interface module
A1SJ71AP21-S3

PLC station distance: 2Km. Cable type: GI-50/125.

MITSUBISHI
Melsecnet interface module
A1SJ71AP21GE

PLC station distance: 2Km. Cable type: GI-62.5/125.

MITSUBISHI
Melsecnet interface module
A1SJ71AR21

PLC station distance: 500M. Cable type: coaxial cable.

MITSUBISHI
Melsecnet interface module
A1SJ71AT21B

Cable type: twisted pair cable. The function of the MELSECNET interface module is to connect the main CPU PLC to the MELSECNET data communication system.

MITSUBISHI
Melsecnet remote interface module
A1SJ72T25B

By MELSECNET/B I/O can be decentralized control. In a main PLC station this module can control up to 512 I/O points.

MITSUBISHI
Master control module
A1SJ71PT32-S3

Cable type: cable or twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.

MITSUBISHI
Master control module
A1SJ71T32-S3

Cable type: twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.

MITSUBISHI
High speed interrupt module
A1SI61

A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.

MITSUBISHI
I/O bus monitoring module
A1SS91

A1SS91 is used to insert a fixed control program in front of the user program to monitor the specific Y output. Monitoring is carried out only when the CPU is in a state of running or stopping, and the monitoring failure is monitored in the suspended state.

MITSUBISHI
Pulse capture module
A1SP60

The A1SP60 pulse capture module is a 16 point DC24V input module, Can be used as a general input module, Can also be used as a pulse capture module, Pulse capture function makes the input signal width in the sequence can be as short as 0.5ms, Once there is a pulse signal input, the state is memory, A1SP60 to ensure that the control process at least once again to control the state of the memory of the operation, Input can be set to 4 blocks, Each block can be set to a general function or pulse capture function.

MITSUBISHI
Analog timer module
A1ST60

A1ST60 analog timer module has 8 analog timers. Each timer can be set between 0.

MITSUBISHI
Intelligent communication module
A1SD51S

A1SD51S is an intelligent communication module used in ANS series, Can use the AD51H-BASIC language to make online or offline programming on the universal terminal or computer, Multitasking can also be performed with up to two programs at high speed. PLC is the use of " sequential scanning, and constantly circulating " way to work.