LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> GT1575-STBA Gateway Functions Manual MITSUBISHI GT1575-STBA Manual

GT1575-STBA Gateway Functions Manual MITSUBISHI GT1575-STBA Manual

Product model: GT1575-STBA
Name: touch screen
Brand: MITSUBISHI
Sort: Gateway Functions Manual
File language: English
File size: 3.22MB
Cable length: 3 meters.
FXCPU GOT.
FXCPU communication function expansion board GOT.
[MINI-DIN 8 pin loose line (row 5 pin interface terminal)].
Applicable model: GT21. Cable length: 10m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT MITSUBISHI GT1575-STBA Manual GT1575-STBA
Applicable models: GT10, GT21. For the QCPU (Q mode) / transport controller CPU (Q Series) bus connection (2 channel) unit standard model.
Applicable models: GT15, GT16, GT27, GT25. Protective film for 10.4 inch screen.
Transparent, 5.
Applicable model: GT15. Oil resistant cap for 3.7 inch screen.
Applicable model: hand held GOT MITSUBISHI GT1575-STBA Manual . Accessories for 8.4 inch models.
Applicable models: GT16, GT15. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 5.7 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422 MITSUBISHI GT1575-STBA Manual .
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 8.4 inches.
Display color: 16 color.
Mounting type: panel mounting type.
Resolution: VGA (640 x 480).
Display device: TFT color.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water GT1575-STBA Gateway Functions Manual.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1575-STBA Gateway Functions Manual.
Related products
MITSUBISHI
8.4 Inch Touch Screen
GT2708-STBA
MITSUBISHI 8.4 Inch Touch Screen GT2708-STBA
Function: high performance and low price in t
MITSUBISHI
10.4 inch touch screen
GT1572-VNBD
MITSUBISHI 10.4 inch touch screen GT1572-VNBD
A series of high performance models that are
MITSUBISHI
8.4 Inch Touch Screen
GT1665M-STBA
MITSUBISHI 8.4 Inch Touch Screen GT1665M-STBA
Series: multimedia and advanced features and
MITSUBISHI
10.4 inch touch screen
GT1575-VTBA
MITSUBISHI 10.4 inch touch screen GT1575-VTBA
A series of high performance models that are