CPM1A-40CDR-A-V1 Manual OMRON Programmable Terminals CPM1A-40CDR-A-V1 HOST CONNECTION MANUAL

Model: CPM2C-8ET1C. Units with relay outputs only.
1 Fujitsu connector.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Model: C500-BC031(3G2A5-BC031).
3 slots(3 linkable slots).
Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Pulse Input Unit.
Input points : 4 pulse inputs OMRON Programmable Terminals HOST CONNECTION MANUAL.
Externa connection: Removable erminal block CPM1A-40CDR-A-V1
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.20A; 26V, 0.16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON Programmable Terminals HOST CONNECTION MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMRON Programmable Terminals HOST CONNECTION MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring CPM1A-40CDR-A-V1 HOST CONNECTION MANUAL.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems CPM1A-40CDR-A-V1 HOST CONNECTION MANUAL.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 20K steps.
Data memory capacity: 64K words (DM: 32K words, EM: 32K words ×1 banks).C500-ID I/O Unit DC Input 32 pts C500-ID215(3G2A5-ID215) CPM1A-40CDR-A-V1 HOST CONNECTION MANUAL.
DC12-24V 10mA.Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 16 outputs; PNP.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O disstribution reduces,
wiring in the system CPM1A-40CDR-A-V1 Manual.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee OMRON Programmable Terminals HOST CONNECTION MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.