OMRON CP1E-N60S1DR-A Hardware PROGRAMMING MANUAL

Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 2 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA; 1/4,00.
Conversion period: 1 ms/point.
Accuracy at ambient temperature of 25°C:
Voltage: ±0 CP1E-N60S1DR-A Hardware. 3% of F.S. Current: ±0.5% of F.S CP1E-N60S1DR-A
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.12A; 24V, 0.14*3.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data CP1E-N60S1DR-A Hardware.
Analog Output Units for converting binary ,
data into analog output signals. Unit type: CS1 Special I/O Units.
Name: High speed Counter Units.
Specifications: Countable channels,
2; Encoder A and B inputs,
pulse input Z signals, Open collector,
Input voltage: 5VDC,12VDC, or 24VDC,
(only 1 axis for 5 V or 12 V input),
RS-422 line driver;
Max CP1E-N60S1DR-A Hardware. counting rate, 50kHz, 500kHz.
No. of unit numbers allocated: 4.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC, N, L, CE.
High-Speed, Flexible Control With A,
Wide Array of Features.
Equipped with 2 or 4 Counters and counts,
over a maximum binary range of 32-bits.
Accepting input pulse frequencies of up,
to 500 kHz allows precise control of fast motions.
The Unit is equipped with 4 Digital Inputs,
4 Digital Outputs and 28 Soft Outputs.
A maximum response time of 0.5 ms guarantees,
high-speed closed loop control of applications. NO. OF I/O SLOTS: 10 SLOTSModel: C200H-OD21A.
No. of points: 16 pts.
Specifications: 1.0 A, 24 VDC. source type (PNP). with load short protection.Protector for Expansion I/O Rack IOIF connector CV500-COV02Power supply: AC power supply.
Output method: Transistor output source type.
Inputs points: 18 points.
Outputs points: 12 points.C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC222Unit type: CJ1 Basic I/O Units.
Product name: Relay Contact Output Units.
Specifications: Output type , --;
I/O points, 16 inputs;
Maximum switching capacity, 250VAC/24VDC, 2A;
Commons, 16 points, 1 common;
External connection, Removable terminal block.
No. of words allocated: 1 word.
Current consumption: 5V, 0.11A; 24V,, 0 CP1E-N60S1DR-A PROGRAMMING MANUAL. 096A max.
Standards: UC1, N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU UUnit and perform ON/OFF,
control for external devices CP1E-N60S1DR-A PROGRAMMING MANUAL.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput.