OMRON CPM2A-40CDT1-D Menu Sheet Programmable Terminals Manual

Unit type: CJ1 CPU Bus Unit.
Product Name: FL-net Unit.
Specifications:Communications interface,
100Base-TX; Communications functions,
With FL-net Ver. 2.0 specifications,
(OPCN-2) Data links and message service,
Max. Units mountable per CPU Units, 4.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0 CPM2A-40CDT1-D Manual. 37A; 24V,--.
Standards: UC1, CE.
Connect to Multivendor Controller Networks CPM2A-40CDT1-D
This Unit allows you to connect to FL-net,
an open network based on Ethernet.
Multivendor FL-net networks can be built,
to combine CJ series PLCs with CNC machines,
robots, and PLCs from other manufacturers. C500-ID Special I/O Unit ID Sensor Unit For the C500-IDS22 C500-IDA22.Connects to right-hand side of CPU block CPM2A-40CDT1-D Manual. Meet the standard interface IEEE-488-1978 (GP-IB).Power supply: DC power supply.
Output method: Relay output.
Inputs points: 24 points.
Outputs points: 16 points.Unit type: CS1 Special I/O Units.
Product name: Analog Input Unit (100 mV).
Input points : 8 inputs.
Signal range: 0 to 100 mV, ±100 mV.
Conversion speed (resolution):
200ms/8 inputs.
Externa connection: Removable erminal block CPM2A-40CDT1-D Manual.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.08A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON Programmable Terminals Manual OMRON Programmable Terminals Manual.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMROON Programmable Terminals Manual CPM2A-40CDT1-D Menu Sheet.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CPM2A-40CDT1-D Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.